Earthquake Sound DB-10 Earthquake Sound 5-YEAR Limited Warranty, Five 5 year limited warranty

Page 5

EARTHQUAKE SOUND 5-YEAR LIMITED WARRANTY

Five (5) year limited warranty

Earthquake warrants the original purchaser that all Factory Sealed New Audio Products to be free from defects in material and workmanship under normal and proper use for a period of five (5) years from the date of purchase (as shown on the original bill of sale with serial number affixed/written on it). The five (5) year warranty period is valid only if an authorized Earthquake dealer properly installs the product and the warranty registration card is properly filled out and sent to Earthquake Sound Corporation. If a non-authorized party installs the product, a ninety (90) day warranty period will be applied.

(A) Five (5) years limited warranty plan coverage guidelines:

?First year: Earthquake pays for labor, parts, and ground freight (only in US mainland, not including Alaska and Hawaii. Shipping to us is not covered).

?Second year: Earthquake pays for labor and parts only, customer must pay

freight both ways.

?Third, fourth & fifth year: Earthquake pays labor only. Customer must pay for parts and freight both ways.

(B) Warning:

Products (sent for repair) that are tested by Earthquake technicians and deemed to have no problem(s) will not be covered by the five (5) year limited warranty. Customer will be charged a minimum of one (1) hour of labor (at the ongoing rates) plus shipping charges back to customer.

(C ) Earthquake will repair or replace at our option all defective products/parts subject to the following provisions:

?Defective products/parts have not been altered or repaired by other than an Earthquake factory-approved technicians.

?Products/parts are not subjected to negligence, misuse, improper use or accident, damaged by improper line voltage, used with incompatible products or have its serial number or any part of it altered, defaced or removed, or have been used in any way that is contrary to Earthquake's written instructions.

(D) Warranty Limitations:

Warranty does not cover products that have been modified or abused, including but not limited to the following:

?Damages to speaker cabinet and cabinet finish due to misuse, abuse or improper use of cleaning materials/methods.

?Bent speaker frame, broken speaker connectors, holes in speaker cone, surround dust cap, burnt speaker voice coil.

?Fading and/or deterioration of speaker components & finish due to improper exposure to elements.

?Bent amplifier casing, damaged finish on the casing due to abuse, misuse or improper use of cleaning material.

?Burnt tracers on PCB.

Specifications are subject to change without notice.

?Product/part damaged due to poor packaging or abusive shipping conditions.

?Subsequent damage to other products.

Awarranty claim will not be valid if the warranty registration card is not

properly filled & returned to Earthquake with a copy of the sales invoice. Warranty card is located on the last page of this manual.

(E) Service Request:

To receive product service, contact Earthquake Service Department at (510) 732-1000 and request an RMA number (Return Material Authorization). Items shipped without a valid RMA number will be refused. Make sure you provide us with your complete/correct shipping address, a valid phone number, and a brief description of the problem you are experiencing with the product. In most cases, our technicians might be able to resolve the problem over the phone; Thus, eliminating the need to ship the product.

(F) Shipping Instructions:

Product(s) must be packaged in its original protective box(es) to minimize transport damage and prevent repackaging cost (at the ongoing rates). Shipper claims regarding items damaged in transit must be presented to carrier. Earthquake Sound Corporation reserves the right to refuse improperly packed product. Original bill of sale must accompany product returned to service. We encourage you to include with the package a written description of the problem. Ship product to: Earthquake Sound Corp. 2727 McCone Avenue, Hayward, CA 94545. Ph: (510) 732-1000. You are responsible for the cost of shipping the product to Earthquake Sound Corporation.

(G) Disputes Resolution:

All disputes between clients and Earthquake Sound Corporation resulting from the five (5) year limited warranty policy must be resolved according to the laws & registration of the county of Alameda California.

PRODUCT REGISTRATION

This Earthquake DB subwoofers can be registered by returning the Product Registration card attached to this manual or by visiting http://earthquakesound.com/form_reg.htm . Please also retain the bill of sale, which represents proof of purchase and helps expedite warranty issues.

We recommended that you place or write your serial number here for future reference, if necessary.

SERIAL NUMBER

EARTHQUAKE SOUND • 5-YEAR LIMITED WARRANTY

5

Image 5
Contents DB Subwoofer DB Single Voice Coil Subwoofer Specifications Earthquake DB SpecificationsSealed Recommended Earthquake DB Enclosure DesignsPorted Dual SubwoofersWiring HOW to Wire Your Earthquake SubwooferConfigurations Ohms 2, 4, 6Five 5 year limited warranty Earthquake Sound 5-YEAR Limited WarrantySound That Will Move You

DB-10, DB-12, DB-15 specifications

Earthquake Sound is renowned for producing premium subwoofers that cater to audiophiles who demand high performance and powerful bass. Among their remarkable offerings are the DB-15, DB-10, and DB-12 subwoofers, each designed to deliver immersive audio experiences for home theater and music lovers alike.

The DB-15 is the flagship model in this series, featuring a 15-inch cone driver that generates thunderous bass while maintaining clarity and precision. With a power handling capacity of up to 3000 watts peak, the DB-15 can easily transform any space into a concert hall or theater. One of its standout technologies is the patented earthquake sound pressure balancing system, which minimizes distortion, allowing for an unparalleled listening experience. Its durable construction ensures longevity and reliability under heavy use.

Next in line is the DB-12, which offers a powerful 12-inch driver that delivers robust bass without compromising on sound quality. It features advanced cooling technology that prevents overheating during extended play, making it a suitable choice for both casual listeners and serious audiophiles. With a power output of 2000 watts peak, the DB-12 is capable of easily handling dynamic ranges in cinematic soundtracks and musical genres alike, bringing every note to life with clarity.

The DB-10, while slightly smaller with its 10-inch driver, doesn't fall short on performance. It’s designed for those who desire deep bass but may have space constraints. This model provides a balanced and punchy sound, making it ideal for smaller home theater setups. The DB-10 is also equipped with a rear-firing port that enhances low-frequency response, providing an impressive setup that can elevate sound experiences without requiring a large footprint.

All three models feature adjustable crossover frequencies and phase controls, allowing users to tailor the subwoofer's response to their specific needs. Each model also comes with various input options to ensure compatibility with different audio systems, providing flexibility in installation.

In conclusion, Earthquake Sound's DB-15, DB-12, and DB-10 subwoofers are designed with innovative technology and user-centric features. Whether you're a home theater enthusiast or a music lover, these subwoofers offer powerful bass, durability, and exceptional performance that will enhance your audio experiences.