Aspire Digital 8930 manual Post

Page 44

The table below describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings.

Parameter

Description

Format/Option

System Time

Sets the system time. The hours are

Format: HH:MM:SS

 

displayed with 24-hour format.

(hour:minute:second)

 

 

System Time

 

 

 

System Date

Sets the system date.

Format MM/DD/YYYY

 

 

(month/day/year)

 

 

System Date

 

 

 

System Memory

This field reports the memory size of the

 

 

system. Memory size is fixed to 640MB

 

 

 

 

Extended Memory

This field reports the memory size of the

 

 

extended memory in the system.

 

 

Extended Memory size=Total memory

 

 

size-1MB

 

 

 

 

VGA Memory

Shows the VGA memory size. VGA

 

 

Memory size=64/128MB

 

 

 

 

Quiet Boot

Determines if Customer Logo will be

Option: Enabled or

 

displayed or not; shows Summary Screen

Disabled

 

is disabled or enabled.

 

 

Enabled: Customer Logo is displayed, and

 

 

Summary Screen is disabled.

 

 

Disabled: Customer Logo is not displayed,

 

 

and Summary Screen is enabled.

 

 

 

 

Power on display

Auto: During power process, the system

Option: Auto or Both

 

will detect if any display device is

 

 

connected on external video port. If any

 

 

external display device is connected, the

 

 

power on display will be in CRT (or

 

 

projector) only mode. Otherwise it will be in

 

 

LCD only mode.

 

 

Both: Simultaneously enable both the

 

 

integrated LCD screen and the system’s

 

 

external video port (for an external CRT or

 

 

projector).

 

 

 

 

Network Boot

Enables, disables the system boot from

Option: Enabled or

 

LAN (remote server).

Disabled

 

 

 

F12 Boot Menu

Enables, disables Boot Menu during

Option: Disabled or

 

POST.

Enabled

 

 

 

D2D Recovery

Enables, disables D2D Recovery function.

Option: Enabled or

 

The function allows the user to create a

Disabled

 

hidden partition on hard disc drive to store

 

 

operation system and restore the system

 

 

to factory defaults.

 

 

 

 

NOTE: The sub-items under each device will not be shown if the device control is set to disable or auto. This is because the user is not allowed to control the settings in these cases.

38

Chapter 2

Image 44
Contents Aspire 8930 Series Service Guide Revision History Copyright IIIConventions Preface Page Features ChapterInput devices CommunicationPorts EnvironmentSystem Block Diagram Board Layout Top ViewODD Cntr Bottom ViewSpdif Your Acer Notebook tour Front ViewClosed Front View Left View Right View Rear viewBase view Indicators HDDEasy-Launch Buttons Touchpad Basics Using the Keyboard Lock Keys and embedded numeric keypadWindows Keys Hot Keys US dollar sign Euro symbolSpecial Key To launch Acer Empowering Technology applications Acer Empowering TechnologyTo launch Acer Empowering Technology Acer eAudio Management Acer ePower Management Page Acer eDataSecurity Management For selected modelsAcer eRecovery Management Acer eSettings Management Windows Mobility Center Using the System Utilities Acer Bio-Protection for selected modelsAcer GridVista dual-display compatible Launch Manager Hardware Specifications and Configurations Bluetooth Interface Hard Disk Drive InterfaceUSB HgstDVD-Super Multi Interface Audio InterfaceVideo Interface USB PortExpress Card Interface System Board Major ChipsBattery Battery Pack Sanyo Battry Pack SonyKeyboard LCD 18.0 inchSystem Power Management LCD InverterAC Adaptor TDKBios Setup Utility System UtilitiesInvoking Bios Setup InformationMain Post Advanced Security Setting a Password Removing a PasswordChanging a Password Boot ExitParameter Description Bios Flash Utility Remove HDD password Utility Remove HDD PasswordMachine Disassembly and Replacement General Information Before You BeginDisassembly Procedure Flowchard Main unit disassembly flow chartLCM module disassembly flow chart Removing the Battery Pack Removing the Wireless Cover & RAM Module Removing the HDDRemoving the Wireless LAN Card/TV Tunder Card and System Fan Removing the Thermal Modules and the CPU Removing the ODD Removing the Hinge coverRemoving the Btcb screws Then remove the switch cover from the machine Chapter Disassembling the Main Unit Page Remove I/O baord and Main Board Remove the USB board from Btcb Chapter Disassembly LCM module Disassembling the External Modules Disassembling the HDD ModuleDisassembling the ODD Module Troubleshooting System Check Procedures External Diskette Drive CheckExternal CD-ROM Drive Check Keyboard or Auxiliary Input Device CheckPower System Check Check the Power AdapterCheck the Battery Pack Memory checkTouchpad Check Power-On Self-Test Post Error Message Index of Error Messages Error Code ListError Message List Bios ROMCmos CPU IDLCD CRTPhoenix Bios Beep Codes Code Beeps Post Routine Description Code Beeps Post Routine Description Code Beeps Post Routine Description Index of Symptom-to-FRU Error Message LCD-Related SymptomsIndicator-Related Symptoms Power-Related SymptomsPCMCIA-Related Symptoms Memory-Related SymptomsSpeaker-Related Symptoms Power Management-Related SymptomsSymptom / Error Action in Sequence Modem-Related Symptoms Peripheral-Related SymptomsKeyboard/Touchpad-Related Symptoms Intermittent Problems Undetermined Problems Top View CN14 MDC CntrBottom View Bottom viewFRU Field Replaceable Unit List Aspire 8930 Exploded Diagram Chapter Chapter Chapter Chapter Chapter Chapter Chapter Chapter Chapter Chapter Chapter Chapter Chapter Accessory Aspire 8930 FRU ListAdapter BoardChapter 101 Cable NVCPEMWR002G2 LFChapter 103 CASE/COVER/BRACKET Assembly CamraChapter 105 FAN HDD/HARD Disk Driver Inverter Chapter 109 LCM Screw 112 Chapter