3In the SCSI Disk Mode section of the control panel, click the ID number you want to assign.
If you are connecting the PowerBook to an existing SCSI chain, make sure to give it an ID number different from those of the other devices. (Many devices include an ID number indicator on the back panel.)
4
5
6
7
8
9
Close the PowerBook Setup control panel.
Turn off the PowerBook by choosing Shut Down from the Special menu.
Shut down the computer you are connecting to, and turn off any other devices in the SCSI chain.
Connect the small connector on the Apple
If you are connecting the PowerBook directly to the other computer (rather than to an external device in the SCSI chain), attach a SCSI system cable to the other computer.
Connect the large connector on the Apple
Remove the terminator from the last device before connecting the PowerBook. (If the last device has an internal terminator, disconnect the device and connect the PowerBook to the end of the SCSI chain. An Apple- authorized service provider can remove the terminator.)
WARNING Always shut down the PowerBook before connecting or disconnecting the SCSI disk adapter cable. Connecting the adapter cable while the computer is turned on can damage the computer.
10 Turn on the PowerBook by pressing the Power On key.
32Chapter 3