Installing the Replacement Keyboard
1Position the keyboard cable over the connector, and pull the keyboard slightly to the right so the cable is not bent. Hold the cable as close as possible to the connector and press straight down. Press the cable firmly into the connector.
2Flip the keyboard over and insert the small tabs at the bottom of the keyboard into the openings in the PowerBook case.
3Pull down on the keyboard release tabs (located to the left of the F1 and F9 keys) and then press down on the top portion of the keyboard.
4 Let go of the keyboard release tabs to secure the keyboard in place.
PowerBook (FireWire) Keyboad - 5