English
68 | 3 Troubleshooting my computer |
The printer does not work.
Check the following:
•Make sure that the printer is connected to a power outlet and that it is turned on.
•Depending on your connection (USB or parallel), make sure that the printer cable is connected securely to the appropriate port on your computer and the corresponding port on the printer.
•During POST, press F2 to access the BIOS Utility and verify that the parallel port is enabled if you use a parallel printer.
I want to set up my location to use the internal modem.
To properly use your communications software, you need to set up your location:
1Click on Start, Control Panel.
2
3Click on the Dialing Rules tab and begin setting up your location. Refer to Windows Help and Support.
Troubleshooting tips
This notebook computer incorporates an advanced design that delivers onscreen error message reports to help you solve problems.
If the system reports an error message or an error symptom occurs, see “Error messages” on page 69. If the problem cannot be resolved, con- tact your dealer. See “Error messages” on page 69.