Alienware Area-51 m5550 Technical Reference
Installing a memory module (DIMM) into the system
To install the DIMM, do the following:
1.Power OFF the notebook. Unplug the AC cord and all cables/devices attached to the notebook. Remove the battery.
2.Place your hand on a large metal object momentarily to discharge any static electricity. Place the notebook on a flat surface and fully close the LCD lid.
3.Locate and remove 9 Screw D’s on the System Device Cover.
4.Remove the System Device Cover. The DIMM socket is now seen as shown below.
61
4/6/2007 12:29:52 PM