Acer 1400 manual Device Address

81

Error Messages	Corrective Action
02F6 Software NMI	System unable to generate software NMI (Non-Maskable
Failed	Interrupt).
	Write down the message and contact your dealer or an authorized
	service center.
02F7 Fail-Safe Timer	Fail-safe timer takes too long.
NMI Failed	Write down the message and contact your dealer or an authorized
	service center.
device Address	Specific device has an address conflict.
Conflict	Enter the BIOS Setup Utility and verify the parameters (try loading
	the default settings); then save and restart your computer.
Failing Bits: nnnn	Memory test failed.
	Write down the message and contact your dealer or an authorized
	service center.
Invalid System	Error with NVRAM (CMOS) data.
Configuration Data	Enter the BIOS Setup Utility and verify the parameters (try loading
	the default settings); then save and restart your computer.
I/O device IRQ	I/O device has IRQ (Interrupt Request) conflict.
conflict	Enter the BIOS Setup Utility and verify the parameters (try loading
	the default settings); then save and restart your computer.

Operating system not found

Operating system cannot be found on the boot device.

Enter the BIOS Setup Utility and verify the hard disk, floppy drive, and boot parameters (try loading the default settings); then save and restart your computer.

If the problem persists, you may need to recover your hard disk, or reinstall the operating system.

Parity Check 1 nnnn Parity error found on system bus.

Write down the message and contact your dealer or an authorized service center.

Parity Check 2 nnnn Parity error found on I/O bus.

Write down the message and contact your dealer or an authorized service center.

If you still encounter problems after going through the corrective measures, please contact your dealer or an authorized service center for assistance. Some problems may be solved using the BIOS Setup Utility. See “BIOS Setup Utility” on page 63.