Acer 7510 Index of Error Messages, Error Message List, Error Messages FRU/Action in Sequence

Index of Error Messages

Error Message List

Error Messages	FRU/Action in Sequence
Struck Key	See “Keyboard or Auxiliary Input Device Check“.
System CMOS checksum bad -	RTC battery
Default configuration used	Run BIOS Setup Utility to reconfigure system, then
	reboot system.
Real time clock error	RTC battery
	Run BIOS Setup Utility to reconfigure system time, then
	reboot system.
	Main board
Previous boot incomplete - Default	“Load Default Settings” in BIOS Setup Utility.
configuration used	RTC battery
	Main board
Invalid System Configuration Data	“Load Default Settings” in BIOS Setup Utility.
	Main board
Operating system not found	Enter Setup and see if fixed disk and drive A are
	properly identified.
	Diskette drive
	Hard disk drive
	Main board
Power-on indicator turns off and LCD	Power source (battery pack and power adapter.) See
is blank.	“Power System Check“.
	Ensure every connector is connected tightly and
	correctly.
	Reconnect the DIMM.
	Main board.
Power-on indicator turns on and LCD	Power source (battery pack and power adapter.) See
is blank.	“Power System Check“.
	Reconnect the LCD connector
	Hard disk drive
	LCD cable
	LCD inverter
	LCD
	Main board
Power-on indicator turns on and LCD	Reconnect the LCD connectors.
is blank. But you can see POST on an	LCD cable
external CRT.	LCD inverter
	LCD
	Main board
Power-on indicator turns on and a	Ensure every connector is connected tightly and
blinking cursor shown on LCD during	correctly.
POST.	Main board

Chapter 4 82