Error Message List
No beep Error Messages | FRU/Action in Sequence |
|
|
Power source (battery pack and power adapter.) See “Power | |
| System Check” on page 83 |
| Ensure every connector is connected tightly and correctly. |
| Reconnect the DIMM. |
| Main board. |
|
|
Power source (battery pack and power adapter.) See “Power | |
| System Check” on page 83 |
| Reconnect the LCD connector |
| Hard disk drive |
| LCD cable |
| LCD inverter |
| LCD |
| Main board |
|
|
Reconnect the LCD connectors. | |
But you can see POST on an external CRT. | LCD cable |
| LCD inverter |
| LCD |
| Main board |
|
|
Ensure every connector is connected tightly and correctly. | |
shown on LCD during POST. | Main board |
|
|
Chapter 4 | 87 |