JL Audio MX10IB3 Fiberglass Thickness Recommended Pilot Hole Drill Size, Enclosure Specifications

! ! CAUTION ! !

While this speaker is designed to be water and spray resistant, it is not designed to be submerged or to withstand high-pressure water spray. Please exercise care when washing your boat to avoid damaging your speaker. Do not install on submersibles, personal watercraft or any other vessel likely to be under water at any time.

Prolonged exposure to sound pressure levels in excess of 100dB can cause permanent hearing loss. This high-performance speaker can exceed this level. Please exercise restraint in its operation in order to preserve your ability to enjoy its fidelity.

When installing a subwoofer in your vessel, it is extremely important to secure it firmly. This applies not only to the woofer itself, but also the structure it is mounted to. If not firmly attached, the speaker can become a dangerous projectile in a collision. Please review the mounting information carefully and use the supplied marine-grade hardware to mount this product.

SUBWOOFER INSTALLATION DIAGRAM

#8 SCREW: PILOT HOLE RECOMMENDATIONS

Fiberglass Thickness	Recommended Pilot Hole Drill Size
0.125 in. (3.18 mm) or less	7/64 in. (2.78 mm) pilot hole
foam core / fiberglass sandwich	7/64 in. (2.78 mm) pilot hole
larger than 0.125 in. (3.18 mm)	1/8 in. (3.18 mm) pilot hole

ENCLOSURE SPECIFICATIONS

Subwoofer		Recommended Sealed Design
	Volume	External Dimensions	F3	Fc	Qtc
	(net int.)	(Width x Height x Depth)	(Hz)	(Hz)
MX10IB3	2.0ft3	18 in. x 18 in. x 14.5 in.	42.9	53.66	0.967
	56.6 litres	457 mm x 457 x 368 mm

Sealed Design

NOTE: The MX10IB3 Marine Subwoofer is not recommended for use in Ported Enclosures.

The enclosure recommendations listed are external dimensions which assume the use of 3/4” (19mm) thick material. If you are using 5/8” (16mm) thick material, subtract 1/4” (6.5mm) from each dimension. Do not use any material with a thickness of less than 5/8” (16mm) as this may compromise the rigidity of the enclosure.

All enclosure volumes listed are net internal volumes! Box volume displacement, port displacement and brace displacement must be added to obtain the final gross internal volume. All enclosure dimensions listed have already taken this into account.

JL AUDIO MX10IB3 A l l s p e c i f i c a t i o n s a r e s u b j e c t t o c h a n g e w i t h o u t n o t i c e . 3