Connecting Your Fathom, Balanced Inputs

CONNECTING YOUR FATHOM

Balanced Inputs

If your home-theater receiver or preamplifier/processor provides balanced outputs, the Fathom’s balanced inputs are the preferred connection. Balanced connections are used extensively in professional studios and sound reinforcement applications for a number of very good reasons. Besides ensuring proper grounding between components, balanced signal transmission is designed to cancel induced cable noise from the surrounding environment (particularly important with long cable runs). The bottom line is that your system will be far less likely to exhibit humming or other extraneous noises if you use balanced connections.

The Fathom subwoofers feature individual left and right balanced input connections with XLR “combo” jacks. These special jacks accept either a three-pin male XLR connector or a “tip-ring-sleeve” (TRS) 1/4-inch (6.3 mm) connector for compatibility with a wide range of equipment.

For systems with a mono subwoofer or “LFE” channel connection, only the jack labeled “Left or Mono” will be used. This applies to most modern multi- channel receivers and preamplifier/processors. Separate left and right input jacks are provided for systems without a dedicated mono subwoofer connection. This typically applies to two-channel audio equipment.

Appropriate balanced cables are available from your JL Audio dealer and are not included with the Fathom.

Technical Notes:

•Do not use the balanced inputs with unbalanced signals via adaptors.

The unbalanced inputs of the Fathom are optically isolated and preferable in situations where only an unbalanced signal source is available.

•Input connectors are configured according to Audio Engineering Society recommendations for balanced signal cables as follows:

XLR Connection Pin 1: Shield Pin 2: Positive Pin 3: Negative

TRS connection: Tip: Positive Ring: Negative Sleeve: Shield

IMPORTANT: IF YOUR RECEIVER OR PREAMPLIFIER/PROCESSOR DOES NOT HAVE XLR OR 1/4-INCH TRS BALANCED OUTPUTS, PLEASE REFER TO THE “UNBALANCED INPUTS” SECTION ON PAGE 19 FOR INPUT CONNECTION INFORMATION. DO NOT ATTEMPT TO CONNECT UNBALANCED OUTPUTS TO THE FATHOM’S BALANCED INPUTS VIA ADAPTORS.

The Left and Right inputs on the Fathom are internally summed to a single mono channel. Since the Fathom is inherently a “mono” or single channel device, you can use the Left and Right inputs for the master Fathom and then distribute the summed mono signal to additional slave Fathoms in the system.

IMPORTANT

Page 18

Fathom f212

f212 specifications

The JL Audio F212 is a premier subwoofer designed to deliver exceptional low-frequency performance for audiophiles and music enthusiasts alike. As part of JL Audio’s renowned subwoofer offerings, the F212 stands out due to its advanced engineering and innovative technology, providing an unparalleled audio experience.

At the heart of the F212 is its unique dual 12-inch driver design, which enables it to reproduce deep bass notes with remarkable clarity and power. The drivers are engineered using JL Audio’s proprietary technology, including a high-excursion suspension system that allows for maximum cone movement without distortion. This ensures that the F212 can handle high power levels while maintaining accuracy across the frequency spectrum.

One of the standout features of the F212 is its robust construction. The subwoofer enclosure is built from high-quality MDF (medium-density fiberboard), designed to minimize resonance and prevent unwanted vibrations that could color the sound. The enclosure is also meticulously tuned for optimal performance, allowing the subwoofers to operate efficiently and deliver rich, immersive bass.

The F212 utilizes advanced thermal management technologies, ensuring that the drivers remain cool during prolonged use. This is achieved through strategically placed venting systems that promote airflow and minimize heat buildup. As a result, users can enjoy continuous, powerful bass performance without the concern of overheating.

In addition to its impressive physical characteristics, the F212 is equipped with sophisticated signal processing capabilities. This allows for seamless integration into any audio system, whether for home theater or high-fidelity music reproduction. The subwoofer features adjustable crossover settings, phase control, and volume adjustments, enabling users to tailor the sound to their specific preferences and room acoustics.

Another noteworthy aspect of the F212 is its versatility. It can be used in various applications, from home audio setups to professional sound reinforcement, making it an ideal choice for anyone seeking to enhance their bass performance. With its combination of power, precision, and advanced technology, the JL Audio F212 stands as a testament to the company’s commitment to delivering high-quality audio solutions that exceed expectations.

In essence, the JL Audio F212 is not just a subwoofer; it’s a statement of quality and performance. Its robust build, innovative technology, and impressive sound output make it a top choice for serious music lovers and home theater enthusiasts seeking to elevate their auditory experience. Whether you’re deep into a cinematic experience or enjoying your favorite music, the F212 is sure to deliver the thunderous bass and clarity that will leave a lasting impression.