Disassembling the LCD Module
1.Remove the six screw pad and the six screws.
2.Detach the LCD bezel carefully.
3.Disconnect LCD inverter.
4.Remove the two screws holding the LCD to LCD panel.
5.Then remove the LCD.
6.Remove the four screws that fasten the right and the left LCD brackets. Then remove the right and the left LCD brackets.
7.Tear off the electric conductive tape that fastens the LCD coaxial cable.
8.Tear off another electric conductive tape that fastens the LCD coaxial cable.
9.Disconnect the LCD coaxial cable.
.
10.Detach the wireless antenna from the LCD panel.
11.Remove the two screws holding the LCD latch kit.
12.Remove the LCD latch kit bracket.
Chapter 3 | 57 |