C5-525 Specifications

Woofers: Cast Alloy Frame, Patented Elevated Frame Cooling	Included Components and Parts:
(U.S. Patent #6,219,431 & #6,229,902), DMA-Optimized Motor	• Two C5-525cw 5.25-inch (130 mm) Woofers
System, Mineral-Filled Polypropylene Cone, Butyl Rubber	• Two C5-075ct 0.75-inch (19 mm) Tweeters
Surround, 1-in. / 25 mm Voice Coil, Kapton® Former, Low-	• Two C5-525-XO Crossover Networks
Profile, Symmetrical Roll Spider, Ferrite Magnet	• Two Flush-Mount Tweeter Fixtures
	• Two Surafce-Mount Tweeter Fixtures
Tweeters: 0.75 in. / 19 mm Silk Soft Dome	• Two Metal Spring Clips for Tweeter Fixtures
RSR Variable-Angle Flush-Mount System, Ferrofluid Cooling	• Two Metal Woofer Grilles with ABS Grille Trays
and Damping, Neodymium Magnet	• Two Self-Adhesive JL Audio Nameplates for Grilles
	• Butyl Adhesive Putty for Woofer Grilles
Crossover Networks: 2-way network with 2nd order	• Twelve #8 x 1.25 inch (32 mm) Sheet Metal Screws
low-pass and 2nd order high-pass circuit, premium Mylar®	• Four #6 x 1-inch (25 mm) Sheet Metal Screws
capacitors, air-core inductors, 4-position adjustable tweeter	• Two 1.18-inch (30 mm) Machine Screws
output level, 3-position midrange presence control,	• Eight Mounting Clips for Woofer Mounting
Polyswitch tweeter protection	• Two 6.4 mm Female Crimpable Connectors
	• Four 4.7 mm Female Crimpable Connectors
Continuous Power Handling: 75 Watts (RMS Method)	• Two 2.8 mm Female Crimpable Connectors
Peak Music Power: 225 Watts	• Four 2.8 mm Male Crimpable Connectors
Recommended Power Range: 25-150 Watts (RMS)	• Twelve Crimpable Spade Connectors
Frequency Response: 53 Hz - 25 KHz (± 3 dB)
Efficiency @ 1W/1m: 88.5 dB @ 1W/1m
Nominal Impedance: 4 ohms

Due to ongoing product development, all specifications are subject to change without notice.