47
Create factory default image CD
When the System CD and Recovery CD are not available, you can create them by using this feature.
1Boot to Windows XP.
2Press <Alt> + <F10> to open the Acer eRecovery Management utility.
3Enter the password to proceed. The default password is six zeros.
4In the Acer eRecovery Management window, select Recovery settings and click Next.
5In the Recovery settings window, select Burn image to disk and click Next.
6In the Burn image to disk window, select 01. Factory default image and click Next.
7Follow the instructions on screen to complete the process.
Re-install bundled software without CD
Acer eRecovery Management stores
1Boot to Windows XP.
2Press <Alt> + <F10> to open the Acer eRecovery Management utility.
3Enter the password to proceed. The default password is six zeros.
4In the Acer eRecovery Management window, select Recovery actions and click Next.
5In the Recovery settings window, select Reinstall applications/drivers and click Next.
6Select the desired driver/application and follow the instructions on screen to
At first launch, Acer eRecovery Management prepares all the needed software and may take few seconds to bring up the software content window.