AC Adapter
Item |
| Specification |
|
|
|
Maximum input current (A, | 2.25A | @ 90Vac |
@90Vac, full load) | 1.125A | @ 180Vac |
|
|
|
Nominal frequency (Hz) | 47 - 63 |
|
|
|
|
Frequency variation range (Hz) | 47 - 63 |
|
|
| |
Nominal voltages (Vrms) | 100- 240 | |
|
| |
Inrush current | The maximum inrush current will be less than 50A and 100A when the adapter | |
| is connected to 115Vac(60Hz) and 230Vac(50Hz) respectively. | |
|
| |
Efficiency | It should provide an efficiency of 83% minimum, when measured at maximum | |
| load under 115V(60Hz). | |
|
|
|
Output Ratings |
|
|
|
| |
DC output voltage | +18.8V~20.0V including the effects of line voltage variation, load current, | |
| ripple and noise | |
|
| |
Noise + Ripple | ||
|
|
|
Output current | 0~4A |
|
|
| |
Input rated voltage | 100/240V | |
|
| |
Input current | 2.25A@90Vac for Delta/ 1.125@180Vac for | |
|
|
|
Dynamic Output Characteristics |
|
|
|
|
|
3 sec. |
| |
|
| |
Hold up time | 4 ms min. (115 Vac, input full load) | |
|
|
|
Over Voltage Protection (OVP) | 29 V |
|
|
| |
Short circuit protection | Output can be shorted without damage | |
|
| |
Electrostatic discharge (ESD) | 15kV (at air discharge) | |
| 8kV (at contact discharge) | |
|
|
|
Dielectric Withstand Voltage |
|
|
|
| |
Primary to secondary | 3000Vac (4242Vdc) 10mA for 1 second | |
|
| |
Leakage current | 100uA max (240Vac, 60Hz) | |
|
| |
Regulatory Requirements | Internal filter meets; | |
| 1. FCC class B requirements. | |
| 2. VDE 243/1991 class B requirements. | |
| 3. CISPR 22 Class B requirements. | |
| 3. VCCI class II requirements. | |
|
|
|
Power Management
Power Saving Mode | Phenomenon |
|
|
Standby Mode | The Sleep indicator lights up |
Waiting time specified by the System Standby value |
|
or the operating system elapses without any system |
|
activity. |
|
Or |
|
When the computer is about to enter Hibernation |
|
mode (e.g. during a |
|
Hibernation file is invalid or not present. |
|
|
|
Hibernation Mode | All power shuts off |
When customized functions for power management |
|
are set to Hibernation and the corresponding action is |
|
taken. |
|
|
|
Display Standby Mode | The display shuts off |
Keyboard, |
|
pointing device are idle for a specified period. |
|
|
|
32 | Chapter 1 |