Sanyo POA-HDTM01 owner manual Appendix, Troubleshooting, Problem Solutions

Page 35

Appendix

Troubleshooting

Before calling your dealer or service center for assistance, check the items below once again.

-Make sure you have properly connected the transmitter to peripheral equipment.

-Make sure all equipment is connected to the AC outlet and the power is turned on.

Problem

Solutions

No power

- Plug the AC power cord into the AC outlet.

 

- Check the connection of the AC adaptor and try to

 

re-connect the AC adaptor.

No image

- Check the LINK indicator.

 

- Check the authentication in the single mode.

 

- Check both ID numbers in the transmitter and the

 

projectors in the broadcast mode.

 

- Check the compatible signals of the transmitter. (see

 

p.38)

Poor (noisy) Image

- Check the reception level of the projectors.

 

- Try to increase the output level in the broadcast

 

mode.

 

- Make sure there is no obstruction between the

 

transmitter and the projector.

 

- Try to move the transmitter or the projector.

 

Maximum operation range is within about 30 m.

Block-noise of Images

- Try to adjust the output level in the broadcast

 

mode.

 

- Try to move the transmitter or the projector.

 

 

Some Indicators are blinking.

- When the transmitter detects an abnormal

 

condition, three INPUT indicators and LINK indicator

 

blinks. In this case, unplug the AC power cord and

 

reconnect it, and then turn the transmitter on once

 

again to verify operation. If the transmitter cannot

 

be turned on, unplug the AC power cord and

 

contact the service station.

Buttons do not work.

- Unlock the key lock function.

Key Lock Number is required at

- The key lock function is being set. Enter the 4-digit

start-up.

number you have set.

 

 

Unable to select INPUT 3(HDMI)

- When using the broadcast mode, HDMI cannot be

 

selected.

Unable to select the secondary

- 1(one) HD DATA WIRELESS Receiver Board is

HD DATA WIRELESS Receiver

available in 1(one) projector. When using multiple

Board.

HD DATA WIRELESS Receiver Boards, only a slot with

 

the smallest number is available for use.

English

HD DATA WIRELESS TRANSMITTER BOX OWNER'S MANUAL

35

Page 34 Page 36
Image 35
Page 34 Page 36
Contents Model POA-HDTM01 You can select one of 2 installation modes as follows Features and DesignSingle Mode Broadcast ModeTable of Contents Sanyo Fisher Sales Europe GmbH Safety PrecautionTo the Owner Safety Instructions Safety Instructions Air Circulation Federal Communications Commission Notice ComplianceCompliance Declaration of Conformity Before use Package contentsPreparation Display Part Names and FunctionsOpen or close the menu on Serial Input 1 ComponentInput 2 Digital DVI-D Input 3 HdmiBNC Cable InstallationConnection to external equipment Component OutputConnecting the AC Power Cord Slot Cover or Interface Board Screws Guide Socket Installing the Receiver into the ProjectorBoard along Guide to fit Plug into SocketInput Selection Basic Setting and OperationProjector Operation Turning on the ProjectorTurning off the transmitter Turning on the TransmitterPress the Menu button to show the LCD Display How to Operate the MenuInput Source Selection Input buttonMenu Tree When changing a pair of transmitter and receiver Flow of Installation ModeSingle Mode Operation Broadcast Mode OperationMain Menu 1/6 Single Mode Setup Sub Menu 1/2 Authentication Single Mode OperationMode Select & 1/6 Single Mode Setup Transmitter Main Menu 6/6 Mode SelectAuthentication Menu Success icon Failure icon Mode selectAuthentication Perform the Authentication again. Refer to Main Menu 1/6 Single Mode Setup Sub Menu 2/2 InitializeButton. The authentication will be reset Authentication MenuPress the Menu button to exit this Menu Broadcast Mode OperationMode Select & 4/6 ID Number Main Menu 4/6 ID NumberInput ID Output Level Select Reception Level Menu Reception LevelTo set Key Lock Other Basic OperationKey Lock To enter a new Lock KeyTo release Lock Key To change Lock KeyInformation Image AdjustContrast Setting Brightness SettingPress the Menu button to display Reset Function of the projectorReset Reset MenuIndicators Maintenance and CareCleaning the cabinet Appendix TroubleshootingProblem Solutions Interface SpecificationsCompliance Input 3 Hdmi Compatible Signals SpecificationsInput 2 Digital DVI-D DVI 24 Pin Configurations of Terminals1AA6P1P5524-- Iffz

POA-HDTM01 specifications

The Sanyo POA-HDTM01 is a high-performance projector lamp designed specifically for use with various Sanyo projector models. It is engineered to deliver brilliant brightness, exceptional color accuracy, and reliable performance, making it an ideal choice for both professional and home theater applications.

One of the standout features of the POA-HDTM01 is its high lumen output, which enables it to produce bright and vibrant images, even in well-lit environments. This makes it suitable for presentations in conference rooms, classrooms, and other venues where ambient lighting cannot be easily controlled. The lamp's brightness ensures that text and visuals remain sharp and clear, enhancing the overall viewing experience for the audience.

The lamp utilizes advanced UHB (Ultra High Brightness) technology, which is designed to maximize light output while minimizing power consumption. This results in a longer lifespan for the lamp, allowing users to enjoy extended periods of use without the need for frequent replacements. The POA-HDTM01 is capable of producing outstanding image quality, with rich colors and high contrast ratios that enhance the depth and vibrancy of projected images.

In terms of installation, the POA-HDTM01 features a user-friendly design that simplifies the replacement process. It is compatible with multiple Sanyo projectors, ensuring a seamless transition for users upgrading or replacing their existing lamp. The robust construction of the lamp provides durability and reliability, which are essential for maintaining uninterrupted presentations or movie screenings.

Another significant characteristic of the POA-HDTM01 is its quieter operation compared to traditional projector lamps. This is particularly beneficial in settings where noise levels need to be kept to a minimum, such as during film screenings or high-stakes business presentations.

Overall, the Sanyo POA-HDTM01 projector lamp stands out due to its impressive brightness, longevity, user-friendly design, and quiet operation. It is an excellent choice for anyone looking to enhance their projection experience, ensuring that content is presented with clarity and impact. As technology continues to evolve, the durability and performance of the POA-HDTM01 make it a reliable option for both casual and professional users alike.
Top Page Image Contents