RBH Features

RBH Series Cabinets

RBH Series Cabinets are designed to offer the ultimate in sound quality and stage flexibility. They can be played in several positions, upright, stacked on their sides, or rocked back for close monitoring situations. A unique interlock- ing corner design allows the cabinets to lock together in various positions.

Horn Bi-Amp (HBA) System:

All RBH cabinets include a passive crossover for standard operation or may be used with GK’s unique Horn Bi-Amp (HBA) System.

HBA compatible amplifiers use an electronic crossover to split the signal between the main amplifier and a separate horn (tweeter) amplifier. The horn amp sends signals above 5kHz to the horn while the main amplifier sends a full range signal to the woofers. Optionally you can engage the Woofer High-Cut to to cut signals above 5kHZ from the main amplifier. Both signals are delivered to the cabinet via a single 4-conductor high current twist- lock cable. This arrangement does two things for the sound:

1)Electronic crossovers, can be far superior to the passive crossover found in full range speaker cabinets, providing a more seamless, accurate sound.

2)With separate power amps for the horn and woofer, the artist can overdrive the woofer power amp (creating the desired growl) while keeping the horn amplifier clean and undistorted.

Input Plate:

1 2 34

1) High Current Twist-Lock Connector:

A Speakon® compatible connector which allows for Horn Bi-Amp (HBA) operation when using the 4-conductor twist-lock speaker cable provided with GK HBA compatible amplifiers. Pins 1+ and 1- connect the main amplifier to the woofers in the cabinet. Pins 2+ and 2-, connect the horn amplifier to the tweeter. By using only pins 1+ and 1- this connector may also be used for full range operation when Full Range mode is selected.

2) Mode Switch:

Switches between Horn Bi-Amp (HBA) mode and Full Range operation. When using this cabinet with a GK HBA compatible head such as the 1001RB-II, this switch should be set to Bi-Amp. For operation with non HBA amplifiers this switch should be set to full range.

3) Full Range ¼'' Input:

Using a standard ¼'' speaker cable, this input jack provides full range operation with any bass amplifier head. HBA mode will not work with this jack.

4) High Range Attenuator:

Adjusts the volume level of the horn when the cabinet is in full range mode. When used in Bi-Amp mode with an HBA compatible amplifier like the 1001RB-II, this control is bypassed and the horn level is adjusted by using the Tweeter control on the front panel of the amplifier.

Horn Bi-Amp Mode:

When the mode switch is set to Bi-Amp, the passive crossover is bypassed and the cabinet may be used with an HBA compatible head such as the GK 1001RB-II. Use a 4-conductor, high current twist-lock speaker cable (supplied with GK HBA amplifiers) to connect the head to the cabinet Adjustments to the tweeter and woofer signals are controlled from the amplifer’s front panel. (the High Range attenuator in the cabinet is bypassed). Now you can push the woofers to the max., while the tweeter remains clean, crisp and free of clipping distortion.

Full Range Mode:

The RBH series cabinets are configured for full range operation by setting the mode switch to Full Range. In this mode you can use either the ¼” or the twist-lock connector for operation. If you are using the twist-lock connector, make sure the amp positive lead is connected to 1+ and the amp negative lead is connected to 1- on the connector. In this mode the cabinet is setup for full range operation and the tweeter level is controlled by the High Range control on the RBH cabinet.

Stacking RBH Cabinets:

To insure the safe setup of the RBH series cabinets and a GK amplifier please follow these basic procedures. When stacking multiple 115RBH and 410RBH cabinets never place them so the handle sides are facing one another. The cabinets’ handles should be oriented to the left and right sides of the unit and not the top and bottom. (See “Detail A”) When stacking a 210RBH cabinet on a 115RBH or 410RBH, place the 210RBH on an upright, non-handle side of the other cabinet. (See “Detail B”) When using a single cabinet, the amplifier may be placed on either the non-handle (See “Detail C” on page 4) or handle side (See “Detail D”). Stacking multiple 210RBH cabinets is not recommended. All RBH cabinets can be tilted back like a floor monitor.

410RBH, 115RBH, 210RBH specifications

RBH Sound has long been a renowned manufacturer of high-fidelity audio products, and their series of speakers, including the 210RBH, 115RBH, and 410RBH, exemplifies their commitment to delivering superior sound quality and innovative design. Each of these models is engineered to provide an exceptional listening experience, suitable for various audio applications.

The 210RBH is a compact floor-standing speaker that packs a powerful punch despite its size. It features dual 8-inch woofers and a 1-inch tweeter, allowing it to deliver a well-balanced sound profile with deep bass response and crisp highs. The speaker utilizes RBH’s proprietary aluminum voice coils, which enhance durability and improve heat dissipation, leading to extended performance during demanding sessions. Additionally, the cabinet is constructed from high-density MDF with a sleek veneer finish that not only looks great but also reduces resonance for cleaner sound.

The 115RBH, on the other hand, is designed with versatility in mind. This bookshelf speaker is equipped with a single 5.25-inch woofer and a 1-inch tweeter, ensuring that it can be easily placed on bookshelves or mounted on walls without sacrificing sound quality. Its efficient design allows it to be used both for music listening and home theater setups. The speaker boasts RBH’s custom crossover technology, allowing for a smooth transition between bass and treble frequencies.

Finally, the 410RBH is designed for audiophiles who demand full-range sound and power. With dual 10-inch woofers and a 1-inch tweeter, this model is built to fill larger spaces with robust audio that remains clear at high volumes. The 410RBH features an advanced venting system to control airflow, which minimizes distortion and enhances low-frequency performance. Additionally, it includes custom-designed terminals for secure cable connections, further ensuring the integrity of the sound quality.

All three models exemplify RBH Sound’s commitment to excellence in audio engineering, featuring technologies aimed at minimizing distortion while maximizing sound clarity. Whether used in a home theater, for music production, or simple audiovisual enjoyment, the performance of the 210RBH, 115RBH, and 410RBH speakers is certain to impress both casual listeners and serious audiophiles alike.