IOGear wireless 1080p computer to hd display kit (mac) Hardware Installation, Option 1 Hdmi

Page 11

Hardware Installation

1.Connect the Wireless USB PC Adapter

1.Connect the Wireless USB PC Adapter to a high speed PC USB port.

2.The system will automatically detect and install the drivers.

2.Connect the Power Adapter

1.Plug the AC Adapter cord into the DC-IN on the back of the Receiver Base.

2.Connect the AC adapter a live electrical outlet. The power light on the front panel glows red when the Receiver Base is powered on.

3.Connecting a TV, Monitor or Projector

1.You can connect a digital (HDMI) or analog (VGA) monitor to the Receiver Base.

Only one monitor can be connected to the HD Adapter at a time.

2.Connect an HDMI or VGA Cable to the HDMI or VGA port on the Receiver Base

3.Connect the other end of the cable to the TV, Projector or external monitor.

Option 1 - HDMI

11

Image 11

Contents Wireless 1080p Computer to HD Display Kit Mac Page Table of Contents Requirements Package ContentsIntroduction Standards SpecificationsBase Receiver PC AdapterReceiver Base Back View OverviewReceiver Base Front View Installation Steps Software Installation MacPage Page Page Connecting a TV, Monitor or Projector Hardware InstallationConnect the Wireless USB PC Adapter Connect the Power AdapterConnecting USB Devices Option 2 VGA Connecting Audio DevicesIntroducing the UWB Connection Manger Software Using the Iogear Wireless Software MacIOGEAR-GUWAVKIT4 Page Page Renaming the Wireless Device Configuring the Display in Mac Mode Adjusting Video Settings Turning On Mirroring ModeTroubleshooting and Support Display Error Scalable Link Interface SLI mode is not available Mirror mode is not available grayed outPage USB device does not work Connection to the GUWAVKIT4 has been lostCE Compliance Federal Communications Commission FCC StatementContact Limited WarrantyPage Page Iogear