Control System for Spectrum Series
1.5-12V Trigger: The built-in 5-12V trigger input allows your screen to synchronize its drop & rise with the projector’s power cycle. The screen deploys when the projector powers up and will retract when the projector powers down. The 5-12 volt adaptor connects to your projector’s trigger output via a separate cable that may or may not be provided by the manufacturer of the projector. The trigger feature will not work without an output cable from the projector, but it can be tested by connecting the Red (+) and Green (-) cable to a 9-volt battery.
2.3 -Way Wall Switch: The 3-way wall
switch is a wall mount control box with an up/stop/down button and plugs directly into the screen’s RJ-45 input.
3-prong power cable
RJ-45 input for 5-12V Trigger
Red: DC 12 +
Green: 0 V -5-12 Volt Trigger Cable
3.IR “Eye” Receiver: (Not Included) The IR “Eye” Receiver plugs directly into the screen’s RJ-45 input to present a low profile line-of-sight control option for your IR remote control even in a recessed ceiling installation.
3-way Wall switch | IR “Eye” Receiver |
4.IR Remote Control: The Infrared functions by direct line of sight contact with a beam range of 30 feet.
5.RF Remote Control: (Not Included) The radio waves eliminate the need for a direct line of sight with a range of 150 feet.
UP
Stop
Down
5
Rev.010312-AS | |
www.elitescreens.com | info@elitescreens.com |
