RSM Elite Series Projector Mounts | Installation Instructions |
1 | (not included) | RSM INSTALLATION |
|
| NOTE: Models |
|
| identical EXCEPT each provides a different |
|
| keyed lock. |
|
| Threaded Pipe Installation |
|
| 1. Carefully determine required mounting location. |
(not included) | 2 | IMPORTANT ! : This will require knowing the lens |
| to screen distance. See projector specifications | |
| 4 | for details on determining this distance. |
| 2. Install | |
|
| |
|
| B1.20.1 (Schedule 40, 0.154" minimum thickness |
| 3 | aluminum - ASTM B221) threaded extension |
| column (not included) into threaded collar until | |
|
| tight, with a minimum of four threads engaged. |
|
| WARNING: IMPROPER INSTALLATION CAN |
|
| RESULT IN SERIOUS PERSONAL INJURY OR |
|
| DAMAGE TO EQUIPMENT! Structural members |
|
| MUST be capable of supporting five times the |
|
| combined weight of all equipment being mounted. |
| (A) | 3. Align RSM with end of NPT pipe. |
|
| 4. Thread RSM up onto pipe by turning until hand |
|
| tight. |
| 2 | Rough Alignment of RSM |
| 1. Turn RSM clockwise or | |
|
| |
|
| front of mount is facing target. |
| 1 | 2. Secure RSM to pipe by turning set screw until tight. |
(A) |
| CAUTION: DO NOT OVERTIGHTEN! Over |
| tightening of setscrew can damage threads on pipe. | |
|
| |
|
| 3. Turn security screw using a Phillips screwdriver |
|
| until set screw cannot be seen through access hole |
|
| in RSM. |
|
| 3 |
1 |
|
|
| (bottom view) |
|
6 |
|
|