Hitachi FX-77, FX-63, FX-82W manual Fasten the screws tightly, Pages

StarBoard FX-77/FX-63/FX-82W Safe Handling

Careful thought was given to the cautions on this device and in this user’s guide. However, unanticipated circumstances might occur. When operating this product, users themselves must exercise caution as well as follow instructions.

CAUTIONS

Caution Details Page(s)

Fasten the screws tightly.	P.1-5
Otherwise, the stand might fall and cause injury or the impact of the falling
board might cause damage.
This work should be performed by at least two people.	P.1-6
The board might fall and cause injury or its impact might cause damage.	P.1-7
	P.1-9
Fasten the screws tightly.	P.1-7
The board might fall and cause injury or its impact might cause damage.
Before installation, take the wall material into consideration.
If it is installed by using a method inappropriate for the wall material, the	P.1-8
board might fall.
Also, installation might be impossible, depending on the wall selected. For
details, consult your dealer.
Before installation, take the wall strength into consideration.
Before using the StarBoard, make sure that it has been fastened securely so	P.1-8
that it will not fall. Also verify that the wall mounting bracket is strong
enough to support a weight of approximately 88.2lb. /40 kg.
Be sure to orient the battery correctly.	P.2-1
Do not reverse the + and – terminals of the battery, and use only the
specified type of battery. Otherwise, it will overheat and fail.
Be sure to insulate the battery before discarding it.
Before discarding the AA battery, be sure to insulate the + and – terminals	P.2-1
with cellophane tape, or similar material. If batteries are discarded without
insulation, they might short or overheat, rupture, and ignite, resulting in
injury or fire. Also, dispose of them as instructed by the local authorities.

7English