Peerless Industries A100IWBMOUNT manual Tools Needed for Assembly

Page 2

NOTE: Read entire instruction sheet before you start installation and assembly.

WARNING

Do not begin to install your Peerless product until you have read and understood the instructions and warnings contained in this Installation Sheet. If you have any questions regarding any of the instructions or warnings, please call Peerless customer care at 1-800-865-2112.

This product should only be installed by someone of good mechanical aptitude, has experience with basic building construction, and fully understands these instructions.

Make sure that the supporting surface will safely support the combined load of the equipment and all attached hard- ware and components.

Never exceed the Maximum Load Capacity. See page one.

If mounting to wood wall studs, make sure that mounting screws are anchored into the center of the studs. Use of an "edge to edge" stud finder is highly recommended.

Always use an assistant or mechanical lifting equipment to safely lift and position equipment.

Tighten screws firmly, but do not overtighten. Overtightening can damage the items, greatly reducing their holding power.

Carriage box has over 100 lbs (43 kg) of pressure. Be careful not to pinch fingers.

This product is intended for indoor use only. Use of this product outdoors could lead to product failure and personal injury.

This product was designed and intended to be mounted to the following supporting surfaces checked below with the hardware included in this product as specified in the installation sheet. To mount this product to an alternative support- ing surface, contact Peerless customer care at 1 800 865-2112.

This product was designed to be installed on the following wall construction only;

WALL CONSTRUCTION

ADDITIONAL HARDWARE REQUIRED

x

Wood Stud

None

 

Wood Beam

None

x

Solid Concrete

None

x

Cinder Block

None

x

Metal Stud

Do not attach except with Peerless accessory kit for metal studs;

 

 

Contact Customer Service for Peerless accessory kit for metal studs.

 

Brick

Contact Customer Service

 

Other or unsure?

Contact Customer Service

Tools Needed for Assembly

stud finder ("edge to edge" stud finder is recommended)

phillips screwdriver

drill

1/4" bit for concrete and cinder block wall

1/2" bit for metal stud wall

5/32" bit for metal or wood stud wall

level

2 of 16

ISSUED: 04-08-08 SHEET #: 055-9094-2 06-06-08

Visit the Peerless Web Site at www.peerlessmounts.com

For customer care call 1-800-865-2112 or 708-865-8870.

Image 2
Contents Model A100IWBMOUNT Tools Needed for Assembly Wall Construction Additional Hardware RequiredI J Parts List ChartInstallation to Wood Stud Wall Installation to Solid Concrete or Cinder Block SolidCarriage Toggler Detail Detail Screen Bracket Side View Bottom View Front ViewDetail Attaching Adapter Plate to Projector Connection Block Shoulder Notchindicates Front ProjectorAttaching Adapter Plate to Projector Mount Projector Alignment Front View Side View

A100IWBMOUNT specifications

The Peerless Industries A100IWBMOUNT is an innovative and highly versatile wall mount solution designed for both residential and commercial settings. Recognized for its exceptional quality and engineering, this mount caters to a wide array of display sizes and types, making it an ideal choice for anyone looking to optimize their viewing experience.

One of the standout features of the A100IWBMOUNT is its flexibility in supporting various display configurations. This mount can accommodate TVs and displays ranging from 10 to 32 inches, allowing users to enjoy an expansive selection of screen sizes. The A100IWBMOUNT supports VESA mounting patterns, ensuring compatibility with a broad spectrum of television brands and models. This standardization simplifies installation and allows users to easily upgrade their displays while retaining the mount.

Installation is made straightforward by the design of the A100IWBMOUNT. The mount comes with a comprehensive installation kit that includes everything necessary for a secure fit. With a weight capacity of up to 50 pounds, it offers robust support for numerous display types. The mount also features a tilting mechanism, which provides a versatile range of motion, enabling viewers to adjust the angle of the screen for optimal visibility and reduced glare.

Peerless Industries has integrated advanced safety features into the A100IWBMOUNT, such as a locking mechanism that secures the display in place, alleviating concerns about accidental slips or falls. The mount is crafted from high-quality, durable materials that not only ensure longevity but also add an aesthetic touch to any space. Its sleek, low-profile design minimizes space usage while maintaining a clean and modern appearance.

In terms of technology, the A100IWBMOUNT stands out with its user-friendly adjustments. Users can easily reposition the display to achieve the perfect viewing angle without requiring professional assistance. Moreover, the mount’s lightweight nature makes it simple to maneuver during installation, further enhancing its user-friendliness.

Overall, the Peerless Industries A100IWBMOUNT represents a blend of modern design, robust functionality, and ease of use, catering to the demands of today’s technology-savvy consumers. Its adjustable features, safety mechanisms, and compatibility with a vast array of displays make it a go-to choice for maximizing entertainment and presentation experiences in any environment. Whether for home theater setups or professional displays, the A100IWBMOUNT delivers outstanding performance and reliability.