MIRROR PRINTING
For this application, tape with a clear adhesive must be used.
When the mirror Printing function is used, characters are printed so as to be legi- ble from the adhesive side of the tape. If the labels are then attached to glass or some other transparent material, they can be read correctly from the opposite side. This type of label is particularly useful for attachment to the inside of shop windows or clear notebooks, so that it can be read from the outside. For this application, transparent tape must be used.
EL
AS
N
O NOW | NOW ON SALE |
|
To use Mirror Printing:
(1) Holding down the CODE key, press the MIRROR ( MIRROR ) key.
(2) The current print mode (M: or M:⋅) appears on the display.
(3) Still holding down the CODE key, press the MIRROR key again. The display changes between the following two messages:
|
| (MIRROR PRINTING) |
A A A A A |
| A A A A A |
M : ⋅
M :
CAPS | STL | UNDL/FRM | CAPS | STL | UNDL/FRM |
(4)If you want to use Mirror Printing, release the CODE key when “M: ” is
displayed. To use regular printing, release the CODE key when “M: ⋅” is dis- played.
Note:
The Mirror Printing function automatically turns off when the machine is turned off. If you want to use Mirror Printing again after the power has been turned off, you must turn on the Mirror printing function again.