Brother MW-260 appendix Cleaning the pick-up roller

Page 35

Cleaning the pick-up roller

If the pick-up roller is dirty, paper may not be fed correctly.

1Affix a piece of cellophane tape to the pick-up roller.

2Remove the cellophane tape from the pick-up roller.

Pick-up roller

Cello- phane tape

→Any dirt on the pick-up roller is removed with the tape.

Rotate the pick-up roller and repeat the procedure to clean the entire surface of the roller.

18

Image 35

Contents MW-260 Mobile Printer Introduction FCC Warning Introduction Page Precautions Meanings for symbols used in this manual Concerning this printer Recharge Lithium-ion Battery Viii Precautions Others Li-ion Concerning the AC adapterPage Xiii Operating precautions Page Page Contents Right side General DescriptionRemoving the protective film Operating ProceduresAfter charging is finished, disconnect the AC adapter ChargingPage Set the interface switch to Bluetooth Set the interface switch to IrDA infraredTurning on/off the printer Other features of Bluetooth technology Bluetooth Functions GuideWhat is Bluetooth? Precautions for using BluetoothFirmly fold the lid back Along the fold Preparing the paperTo prepare the paper cassette Page Insert the paper cassette Installing the paper cassettePaper type indication Sending data through an IrDA connection Sending data from a Pocket PC or computerSending data through a USB connection Communicating with BluetoothEstablish a Bluetooth con Nection Start printingPull the paper out from the paper output slot Feeding paperInstalling the paper guide Using the paper guideClean the sensor with a dry cotton swab MaintenanceCleaning the printer Cleaning the sensorCleaning the pick-up roller Appendix Product specificationsPrinter specifications Paper sizes print area TroubleshootingSymptoms & remedies With a Bluetooth connection Remain in the printer. Contact the sales Direction of the arrow to free it Status indicator light Indicator lightsCharging indicator light Glossary PDA