Panasonic KX-PW76CL Using Hand Scanner, Scanning a document, Scanner Memory capacity

Using Hand Scanner

Scanning a document

6 Press the hand scanner against the document,

Resolution

画質�

文字�

写真�

Width

読取幅�

A4

B4

Operation indicator

and move it slowly towards the direction of the arrow ( ).

●When it is scanning properly, the operation indicator will flash green.

●Scanning speed for different resolution types, see “Operation indicator and warning beep” of the next page.

1 Pull out the Hand scanner, and then turn over it.

2 Choose the desired resolution by Resolution switch.

●Resolution types

文字 (Letter: For documents of letters)

写真 (Photo: For documents containing photographs, etc.)

3 Choose the desired Scanning width by Scanning width switch.

●Scanning width types A4 (Within 208mm) B4 (Within 252mm)

4 Place the scanning position and the 原稿左端 (document left side) on the document.

原稿左端�

(Document left side)

Scanning Position

5 Press

●You will hear a beep, and the operation indicator will light green after about 1 or 2 seconds. You can start scanning after the operation indicator lights green.

Scanning direction

7 After scanning the document, press .

8 Insert the hand scanner in the Main unit.

Bottom side

The scanned page number is displayed.

			読 取 枚 数	○ 枚
				[ く る く る ]
Scanner Memory capacity
Resolution	Scanning		Capacity
switch	Speed
		Apprx. 10 pages
	50mm/1 sec	(document paper size-A4,
Letter		700 letters)
「文字」		Apprx. 20 pages
	100mm/1 sec	(document paper size-A4,
		700 letters)
Photo		Apprx. 1 pages
	－	(document paper size-A4,
「写真」
		photo)

20