Installations and connections
Installing the ink film
1 Open the control panel.
Insert the orange gear into the left slot of the main unit.
2 Open the back cover.
3 Insert the ink film.
Insert the white gear into the right slot of the main unit.
4 If the ink film is slack, tighten it by winding this gear (orange).
5 Close the back cover pressing
“ ” down on both sides until it clicks into place.
6 Close the control panel.
When the unit runs out of ink film, the following message will be displayed.
フィルムなし U23 交換してください 品番:KX-FAN190
Install a new ink film.
Replacement ink film: | ¥714 | |||
| (15 m) | |||
(15 m X 2) | ¥ | 1,208 | ||
| (15 m) (*1) | ¥ | 893 | |
| (15 m X 2) (*1) | ¥ | 1,523 |
4
*1
・As of October 2008. | ・Tax included. |