Operating the built-in answering device
Operating the answering device from a remote location
Preparation: Programming the remote operation ID
1.Press .
2.Press (Search button) repeatedly until the
following is displayed.
留 守 番 電 話 の設 定
AAAAAAAAAAA[ SET]
3.Press .
4.Enter any
or #.
5.Press (Register).
6.Press .
Operation: Listening to a recorded message from a remote location
Turn the light on before you go out. Remote operations are available only from a touch tone telephone.
1.Call your unit.
2.Enter the remote operation ID during the greeting message.
3. Press 2 or wait 4 seconds.
●Only the new recorded messages will be played back.
● To listen to all the recorded messages, press 4 after the new messages have been played back.
17