!!install_ar230270.book 10 ページ ２００４年２月１９日 木曜日 午後１時１７分
INSTALLING THE SOFTWARE
11 When the interface selection screen appears, select "Parallel" and click the "Next" button.
15 When "The installation of the SHARP software is complete" appears, click the "OK" button.
16 Click the "Close" button.
A message will appear instructing you to connect the machine to your computer. Click the "OK" button.
After the installation, a message Note prompting you to restart your computer
may appear. In this case, click the "Yes" button to restart your computer.
12 Select the printer port and click the "Next" button.
Select "LPT1" for the printer port.
If "LPT1" does not appear, another printer Note or peripheral device is using LPT1. In this case continue the installation, and after the
installation is finished, change the port setting so that the machine can use LPT1. This procedure is explained in "Another printer is using the parallel port (when using a parallel cable)" on page 15.
17 Turn off the power of the machine and your computer, and connect the machine to your computer with the parallel cable. (p. 12)
After connecting the machine to your computer, turn on the power of the machine and then start up your computer.
This completes the installation of the software.
After installation, see "CONFIGURING THE PRINTER DRIVER" (p. 13) to check the printer driver settings.
13 When the model selection window appears, select model name of your machine and click the "Next" button. For the model name of your machine, see "PART NAMES AND FUNCTIONS" in the operation manual for copier.
14 Click the "Next" button.
In Windows 95/98/Me/NT 4.0, click the "Yes" button.
Begin installation of the printer driver.
10