Canon L360 manual To Program Group Dial

Page 7

C.TO PROGRAM GROUP DIAL

1.Open One-Touch Speed Dial panel

2.Press Data Registration

3. Press ∨ to display “2. TEL REGISTRATION”

4.Press Set

5. Press ∨ to display “3. GROUP DIAL”

6.Press Set

7.	Press ∨ (if necessary) until an empty space appears

8.Press Set twice

9.Close panel cover & press desired one-touch keys & / or the coded speed dial numbers

10.Press Set twice

11.Enter name for the above group dialer (refer to A.9. on III : TO STORE FAX NUMBERS)

12.Press Set

13.To continue, press Data Registration

14.Repeat steps No. 7 to No. 12

15.To end, press Stop

7

Image 7

Contents Canon Contents To Register Sender Identification Code Numbers for Alphabets and SymbolsPress Data Registration ONE-TOUCH / Coded Dial Sending Direct / Manual SendingPress Start/Copy Memory SendingONE-TOUCH Speed Dial 01-KEYTO 32-KEY IIICoded Speed Dial *00 to *99 To Program Group Dial Group Dial Coded Speed DialPress Start/Copy Press Delayed Transmission Delayed TransmissionREC. Paper JAM VII When the FAX Displays Received in MemoryLoad Paper Replace CartridgePress Memory Reference Viii RE-SENDINGPress Set to display Select Locations To Print a List of Previous 20 Transactions Speed Dial ListTo Print Document Memory List Making Copies Set XI Transmission ReportXII Erasing a Transmit Document from the Memory