Canon L295 manual To Program Group Dial

C.TO PROGRAM GROUP DIAL

1.	Press Function
2.	Press	Data Registration
3.	Press	￿ to display “TEL REGISTRATION”
4.	Press	OK
5.	Press	￿ until display shows “GROUP DIAL”
6.	Press	OK
7.	To register a group dialer :
	Under a one-touch button, press ￿ or ￿ to select available button or
	under a coded speed dial button, press Coded Dial ￿, then 2-digit No.
8.	Press	OK twice
9.	** To assign destinations to the group :
	Press the desired one-touch buttons &/or Coded Speed Dial using
	“Coded Dial		￿, then the 2-digit code” repeatedly
10.	Press	OK twice
11.	Enter name for the above group dialer (refer to A.9. on III : TO
	STORE FAX NUMBERS)
12.	Press	OK
13.	To continue, press			Function, then Data Registration
14.	Repeat steps		No. 7 to No. 12
15.	To end, press		Stop	￿

**You cannot enter fax numbers not already registered for one-touch or coded speed dialling

7