Receiving Faxes Automatically: FAX ONLY MODE (8-3)
If you have a separate telephone line for fax use only, connect your FAX to this line and set FAX ONLY MODE. Your FAX will answer all calls as fax calls.
Setting FAX ONLY MODE
1Press Receive Mode to select FAX ONLY MODE.
❏After a few seconds, the LCD changes to this display:
Ex:
FAX ONLY MODE
15:00 FaxOnly
If FAX ONLY MODE does not appear in the LCD when you press Receive Mode, follow this procedure to set this mode:
1Open the
2Press Data Registration.
3Press Set.
4Use 
or 
to select RX SETTINGS.
5Press Set.
6Use 
or 
to select RX MODE.
7Press Set.
8Use 
or 
to select FAX ONLY MODE.
9Press Set.
10Press Stop to return to standby mode.
11Con®rm that FaxOnly is displayed in the LCD.
DATA REGSTRATION
USER SETTINGS
RX SETTINGS
ECM RX
RX MODE
Ex:
FAX/TEL AUTO SW
FAX ONLY MODE
INCOMING RING
Ex:
15:00 FaxOnly
Ex:
15:00 FaxOnly
❏If FaxOnly is not displayed, press Receive Mode to select FAX ONLY MODE. After a few seconds, the LCD returns to standby mode.
14The numbers in parentheses indicate the pages in the