Canon MX360, MX410 setup guide If Your Wall Plate Has One Jack For Two Lines

Page 5

If Your Wall Plate Has One Jack For Two Lines

If your wall jack provides one jack for two phone lines, it would be best to use a “2 Line 3 Way Adapter.” This adapter can be purchased at most stores that sell electronics. This device creates three plugs where there was one. One jack will be for your voice line. The other jack can be used for your fax transactions. In most cases, line 1 (L1) is used for phone calls; L2 is used of faxing. The third jack (L1+L2) allows access to both lines. This is where you would plug in a 2- line telephone, if available.

The L1 jack is usually your

 

voice line

The L2 jack is usually your fax line

Previous

Next

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Dedicated Fax Line Setup Guide Connecting The Phone Lines Connecting The Phone Lines If Your Wall Plate Has Two Jacks If Your Wall Plate Has One Jack For Two Lines Fax to Phone Line Connection Fax to Phone Line Connection Setting Up The Receive Mode Step Step Press the OK button Receive mode set screen will Appear Step Step Step To Receive a Fax
Related manuals
Manual 20 pages 29.6 Kb Manual 23 pages 50.37 Kb
Top Page Image Contents