II | SENDING A DOCUMENT |
A.DIRECT SENDING
1.Place documents face down on the fax
2.Press DIRECT TX
3.Enter fax number
4.Press START/SCAN
B.MEMORY SENDING
1.Place documents face down on the fax
2.Make sure DIRECT TX is “off”
3.Enter fax number
4.Press START/SCAN
5.Take note of “ TX / RX ” number
C.ONE-TOUCH / CODED DIAL SENDING
1.Place documents face down on the fax
2.Press the appropriate
3.Take note of “ TX / RX ” number
N.B. If direct sending is required, activate DIRECT TX before step No. 2
TO STOP SENDING
A.During a DIRECT TX sending, press STOP
B./C. During a memory sending, press STOP, then * to confirm
4