BATTERY DETAILS
BATTERY REQUIREMENTS:
YOUR ROBORAPTOR™ IS POWERED BY 6 X “AA” SIZE BATTERIES (NOT INCLUDED).
YOUR REMOTE CONTROLLER IS POWERED BY 3 X “AAA” SIZE BATTERIES (NOT INCLUDED).
BATTERY INSTALLATION:
1.BEFORE INSTALLING OR CHANGING BATTERIES, ENSURE THE ROBORAPTOR™’S ON/OFF BUTTON IS IN THE OFF POSITION.
2.REMOVE THE BATTERY COMPARTMENT COVERS USING A PHILLIPS OR CROSSHEAD SCREWDRIVER (NOT INCLUDED).
3.INSERT BATTERIES (NOT INCLUDED) INTO THE ROBORAPTOR™
AND CONTROLLER AS SHOWN IN THE DIAGRAMS.
4. REPLACE THE BATTERY COMPARTMENT COVERS AND THE SCREWS.
ATTENTION: IMPORTANT BATTERY INFORMATION
• USE ONLY FRESH BATTERIES OF THE REQUIRED SIZE AND RECOMMENDED TYPE.
• DO NOT MIX OLD AND NEW BATTERIES, DIFFERENT TYPES OF BATTERIES (STANDARD (CARBON ZINC), ALKALINE, OR
RECHARGEABLE), OR RECHARGEABLE BATTERIES OF DIFFERENT CAPACITIES.
•REMOVE RECHARGEABLE BATTERIES FROM THE TOY BEFORE RECHARGING THEM.
•RECHARGEABLE BATTERIES ARE ONLY TO BE CHARGED UNDER ADULT SUPERVISION.
•PLEASE RESPECT THE CORRECT POLARITY, (+) AND
•DO NOT TRY TO CHARGE
• DO NOT THROW BATTERIES INTO THE FIRE.
• REPLACE ALL BATTERIES OF THE SAME TYPE/BRAND AT THE SAME TIME.
• THE SUPPLY TERMINALS ARE NOT TO BE SHORT CIRCUITED.
• REMOVE EXHAUSTED BATTERIES FROM THE TOY.
• BATTERIES SHOULD BE REPLACED BY ADULTS BECAUSE OF
SMALL PARTS.
• REMOVE BATTERIES IF THE TOY IS NOT GOING TO BE PLAYED WITH FOR SOME TIME.
•THE PACKAGING HAS TO BE KEPT SINCE IT CONTAINS IMPORTANT INFORMATION.
1.5V LR6 UM3 “AA” 
1.5V LR6 UM3 “AA” 
1.5V LR6 UM3 “AA” 
BOTTOM VIEW OF
THE ROBORAPTOR™
1.5V LR03 UM4 “AAA”
BACK VIEW OF THE
REMOTE CONTROLLER
3