Diamond D343, D393I, D373I Features, On-board Crossovers, Standard Connection, Bi-amp Connection

FEATURES

•Textured Copolymer Cones

•Rubber Surrounds

•Proprietary Composite Frames

•Flat Progressive Spider

•Extended Pole Motor Design

•Rubber Boot Magnet Protector

•Aluminum Dome Tweeters with Ferro Fluid Cooling

•Model Specific Crossovers

•Shallow Mount

On-board Crossovers

Each D3 coaxial features an on-board 12 dB/octave crossover and tweeter protection to ensure absolute fidelity and protection during audio reproduction.

Standard Connection

D3 integrated systems are shipped configured for a single channel per speaker. Simply connect the speaker wire from the source to the exposed positive and negative terminals on the speaker.

Bi-amp Connection

An exclusive feature of the D3 integrated systems is the option to power the tweeter and mid-bass driver separately. This feature is called Bi-amping and all D3 coaxials can be bi-amped except D343i. This ability allows for external active filter, phase, and time alignment for each of the drivers indepen- dently. To bi-amp the speaker, remove the two jumper leads from the tweeter terminals on the speaker and connect separate power to the woofer and tweeter terminals.

3

©2008 Diamond Audio Technologies. All rights reserved.