Overview:
The Linksys SPA400 is a 4 Line FXO gateway capable of connecting 4 PSTN lines to your asterisk system to make and receive calls. This guide is a step by step on how to configure Trixbox to utilize the features of the SPA400. Limitations:
*The voicemail function of the SPA400 cannot be used.
*You cannot select which line of the SPA400 to use. They are treated as a single group of
Configure the SPA400:
Step 1 – Obtain the IP address if the SPA400
Option 1(Easiest): You will need to check your DHCP server to see what IP address has been allocated to the SPA400 (Will usually be in the Status area of your Modem/Router).
Option 2(Harder): If you only have a few devices on your network you can use angry IP scanner (http://www.angryziber.com) which will search your network for devices. You should be able to work out the SPA400 address. Try searching for port 5060 also to help identify.
Option 3: You can download the SPA9000 setup utility from http://www.linksys.com it will scan the network for SPA400s and show the IP address.
Note the IP Address: ___________________________________
Step 2 – Access the SPA400
In your favourite web browser type the IP address of the SPA400, it should ask for a username and password.
The default username is Admin (Note capital A)