Air Health WL-8000 Series user manual External Configuration Checkbox Windows XP

Note：Only one configuration utility can be active at a time. When the ZCU is set to be the active utility, opening the TI utility－by double-clicking on the utility icon in the system tray or right-clicking the icon and selecting Open－launches the ZCU inserted of the TI utility.

Configure using	External Configuration Checkbox (Windows XP
Windows Zero Config.	only): A checkbox that	enables you	to disable	the
	WLAN Station Configuration Utility and indicates
	that the station driver is to be configured with
	Windows XP’s built-in Zero Configuration Utility
	(ZCU).
	On Windows XP systems, the ZCU service is
	automatically stopped when the WLAN utility is
	installed. The ZCU is started when you check the
	Configure using Windows Zero Configuration
	checkbox.
	The checkbox is only displayed on Windows XP
	systems.
Profile name	The profile name that is currently connected.
SSID	The SSID is the unique name shared among all points
	in your wireless network.
	The name must be identical for all devices and points
	attempting to connect to the same network.
	Indicates that the network does not require special
	security settings and access rights in order to
	connect to it (that is, you can connect to the
	network by setting the station’s privacy mode to
	None and authentication mode to None.)
	Indicates that the network requires special security
	settings and access rights in order to connect to it.
	Indicates a hidden	network	which is	not
	- 17 -