Linksys LKG0F755E manual Using Your Networked OneTouch Drive, Click Administration, Click Advanced

Page 4

as you will need it to use your networked OneTouch drive after formatting.

16. Click Administration.

A window will open, asking you to enter your user name and password.

17.Enter admin for both user name and password and click OK. The LAN page will appear.

18.Click Advanced.

The Groups page will appear.

19.Click Disk.

The Disk page will appear.

20. Click Format Disk 1.

Note: If your drive is connected to the Disk 2 port on the Network Storage Link, click Format Disk 2.

The formatting process may take 15 to 30 minutes, depending on the size of your OneTouch Drive.

Once it is finished, the message: “Formatted” will appear.

21.Close your web browser and click No at the bottom of the Linksys Setup Screen.

Note: For more information about the Linksys Web Utility, see Chapter 6: “Configuring the Storage Link,” in the Linksys User Guide.

Using Your Networked OneTouch Drive

To use your networked OneTouch Drive, follow these steps:

1. On the desktop, right-click the icon for your computer and choose Map Network Drive.

Figure 5. Mapping a Network Drive

4

Image 4
Contents Before you install please read Share informationSave money Protect your valuable dataInstalling the Network Storage Link and OneTouch Drive Connecting the Network Storage Link to Your NetworkConnecting the OneTouch Drive to the Network Storage Link Powering Up the OneTouch DriveInstalling the Linksys Software Formatting the OneTouch DriveUsing Your Networked OneTouch Drive Click AdministrationClick Advanced Click Format DiskNetwork Backup Software Retrospect Software InstallationAutomated Network Backup Using Retrospect Double-clickMy Network PlacesClick Advanced