Getting to Know the Broadband Network Bridge

Broadband Network Bridge

Rear Panel Ports

Uplink	Share your Internet access over your entire phoneline network
	by connecting to your DSL or Cable modem through the
	Broadband Bridge's uplink port. The uplink port can also con-
	nect to Ethernet devices such as hubs, routers, and switches.
	If the uplink port is occupied, the port to its direct right (Port
	3) will be inoperable. Any connections made through Port 3
	will be lost.
10BaseT	Connect an Ethernet PC (or any other Ethernet device) to
	your HomeLink phoneline network through one of the
	10BaseT ports. If you plan on using Port 3, the Uplink port
	will become unavailable.
HomeLink	Use the HomeLink port to daisy-chain your Broadband
	Bridge to your HomeLink network. This port is configured as
	a pass-through port, meaning that the network data travels
	into the Bridge through one side of the HomeLink port, then
	continues out the other. Connect one HomeLink telephone
	cable into one side of Port 1, then continue (with another
	cable) to your next HomeLink device through the port's other
	side. See page 7 of this User Guide for further information.
Power	Connect your power adapter to your Broadband Bridge
	through the Power port.