Linksys WMP54G manual Appendix B Glossary

Page 19

Instant Wireless® Series

Appendix B: Glossary

802.11b - One of the IEEE standards for wireless networking hardware. Products that adhere to a specific IEEE standard will work with each other, even if they are manufactured by different companies. The 802.11b standard specifies a maximum data transfer rate of 11Mbps, an operating frequency of 2.4GHz, and WEP encryption for security. 802.11b networks are also referred to as Wi-Fi networks.

802.11g - A proposed, but as yet unratified extension of the IEEE 802.11 stan- dard for wireless networking hardware. The draft 802.11g specifications used by Linksys specify a maximum data transfer rate of 54Mbps using OFDM modulation, an operating frequency of 2.4GHz, backward compatibility with IEEE 802.11b devices, and WEP encryption for security.

Adapter - Printed circuit board that plugs into a PC to add to capabilities or connectivity to a PC. In a networked environment, a network interface card is the typical adapter that allows the PC or server to connect to the intranet and/or Internet.

Ad-hoc Network - An ad-hoc network is a group of computers, each with a wireless adapter, connected as an independent 802.11 wireless LAN. Ad-hoc wireless computers operate on a peer-to-peer basis, communicating directly with each other without the use of an access point. Ad-hoc mode is also referred to as an Independent Basic Service Set (IBSS) or as peer-to-peer mode, and is useful at a departmental scale or SOHO operation.

Backbone - The part of a network that connects most of the systems and net- works together and handles the most data.

Bandwidth - The transmission capacity of a given facility, in terms of how much data the facility can transmit in a fixed amount of time; expressed in bits per second (bps).

Bit - A binary digit. The value - 0 or 1-used in the binary numbering system. Also, the smallest form of data.

BSS (Basic Service Set) - An infrastructure network connecting wireless devices to a wired network using a single access point.

Wireless-G Notebook Adapter

CSMA/CA (Carrier Sense Multiple Access/Collision Avoidance) - In local area networking, this is the CSMA technique that combines slotted time-divi- sion multiplexing with carrier sense multiple access/collision detection (CSMA/CD) to avoid having collisions occur a second time. This works best if the time allocated is short compared to packet length and if the number of sit- uations is small.

CTS (Clear To Send) - An RS-232 signal sent from the receiving station to the transmitting station that indicates it is ready to accept data.

Default Gateway - The routing device used to forward all traffic that is not addressed to a station within the local subnet.

DHCP (Dynamic Host Configuration Protocol) - A protocol that lets network administrators manage centrally and automate the assignment of Internet Protocol (IP) addresses in an organization's network. Using the Internet's set of protocol (TCP/IP), each machine that can connect to the Internet needs a unique IP address. When an organization sets up its computer users with a con- nection to the Internet, an IP address must be assigned to each machine. Without DHCP, the IP address must be entered manually at each computer and, if computers move to another location in another part of the network, a new IP address must be entered. DHCP lets a network administrator supervise and dis- tribute IP addresses from a central point and automatically sends a new IP address when a computer is plugged into a different place in the network.

DHCP uses the concept of a "lease" or amount of time that a given IP address will be valid for a computer. The lease time can vary depending on how long a user is likely to require the Internet connection at a particular location. It's espe- cially useful in education and other environments where users change fre- quently. Using very short leases, DHCP can dynamically reconfigure networks in which there are more computers than there are available IP addresses.

DHCP supports static addresses for computers containing Web servers that need a permanent IP address.

DNS - The domain name system (DNS) is the way that Internet domain name are located and translated into Internet Protocol (IP) addresses. A domain name is a meaningful and easy-to-remember "handle" for an Internet address.

Domain - A subnetwork comprised of a group of clients and servers under the control of one security database. Dividing LANs into domains improves per- formance and security.

30

31

Image 19
Contents Wireless-G PCI Adapter Copyright & Trademarks Table of Contents Features Wireless-G PCI AdapterIntroduction Ad-Hoc versus Infrastructure Mode Planning Your Wireless NetworkNetwork Topology Hardware Installation for Windows XP Getting to Know the Wireless-G PCI AdapterOverview Windows XP Wireless Zero Configuration Driver Installation for Windows XPInstant Wireless Series Setup Wizard Instructions for Windows 98SE, Me, Proceed to Hardware Installation for Windows 98SE, Me, 2000 Accessing the Wlan Monitor Hardware Installation forSite Survey Link InformationProfiles Site InformationCreating a New Profile Instant Wireless Series Instant Wireless Series Common Problems and Solutions Appendix a TroubleshootingFrequently Asked Questions What is ISM band? Appendix B Glossary Instant Wireless Series Instant Wireless Series Instant Wireless Series Environmental Appendix C SpecificationsAppendix E Contact Information Appendix D Warranty InformationCopyright 2003 Linksys, All Rights Reserved
Related manuals
Manual 67 pages 42.08 Kb

WMP54G specifications

The Linksys WMP54G is a high-performance wireless PCI adapter that was designed to bring reliable connectivity to desktop computers. Launched as part of Linksys' range of networking products, the WMP54G quickly gained popularity among users seeking a dependable solution for wireless networking in their homes or small offices.

One of the standout features of the WMP54G is its compliance with the 802.11g wireless standard. This technology allows for data transfer rates of up to 54 Mbps, making it suitable for tasks such as streaming audio and video, online gaming, and file sharing. The adapter is also backward compatible with the 802.11b standard, enabling it to work seamlessly with older wireless devices, ensuring users are not left behind as they upgrade their equipment.

The WMP54G is equipped with a powerful external antenna that enhances its range and signal strength. This allows users to maintain a strong wireless connection even when they are far from the router, making it ideal for larger homes or office spaces. It also supports WEP, WPA, and WPA2 security protocols, providing users with multiple layers of security to protect their data and network from unauthorized access.

Another noteworthy characteristic of the WMP54G is its ease of installation and use. The adapter is provided with a user-friendly setup wizard that guides users through the configuration process, making it accessible even for those who may not be tech-savvy. Once installed, the WMP54G offers robust performance, with consistent connections and minimal interference.

The adapter's design is also compact and lightweight, making it a suitable option for machines with limited internal space. Its PCI form factor allows for easy integration into most desktop PCs. Additionally, it comes with status LEDs that indicate when the device is powered on, and when it is connected to a wireless network, providing users with instant feedback on their connection status.

In summary, the Linksys WMP54G is a versatile and reliable wireless adapter that has cemented its place in the networking landscape. With its familiarity with various standards, strong security features, and user-friendly installation, it remains a recommended choice for users looking to enhance their wireless connectivity at home or in the office.