Linksys WDT11 manual Ad-Hoc Mode

Page 28

Instant WirelessTM Series

Ad-Hoc Mode

1.If you have chosen Ad-Hocmode, the following screen will appear. If you have chosen Infrastructure mode, refer to the previous section.

You will be prompted to choose a Channel from the list provided. All computers on your wireless network must be using the same channel in order to communicate with each other. If you are unsure about which chan- nel to use, select the default channel (Channel 6). Once you have chosen your channel, click the Next button.

PCI Adapter

2.The following screen should appear. You will be prompted to enter an SSID value in the box provided. All SSID values on your wireless network must match. If you are unsure, use the default value of “linksys”. Then, click the Next button.

3.The next screen to appear will be the Review Settings screen. Verify that all the settings are correct and click the Next button to continue.

Image 28

Contents I Adapter Copyright & Trademarks Table of Contents Features Instant WirelessTM Network PC Card and PCI AdapterIntroduction Planning Your Wireless Network Pac Package Contents for the PCI AdapterSystem Requirements for the PCI Adapter Network TopologyInstalling the PCI Adapter Power on your desktop PCHardware Installation is complete Installing the PCI Drivers for WindowsX t Installing the PCI Drivers for Windows ME If You Have Never Installed Network Hardware Installing the PCI Drivers for Windows NTInstant WirelessTM Series Type D\WPC11 WDT11\Driver\WinNT Instant WirelessTM Series If You Have Installed Network Hardware Before Installing the PCI Drivers for Windows WDT11\Driver where Copy manufacturer’sInstalling the PCI Drivers for Windows XP Configuring the Network PC Card Install i n g N e t w o r k Protocols sectionInstant WirelessTM Series Configuring the Network PC Card for Windows NT PCI Adapter RTS Threshold PCI Adapter Configuring the Network PC Card for Windows Installing Network Protocols Installing the Network Protocols for Windows 98Configuration Utility Installing the Configuration UtilityAd-Hoc versus Infrastructure Mode Infrastructure Mode Ad-Hoc Mode Link Info Configuration Troubleshooting Common Problems and SolutionsMy computer does not recognize the Network PC Card Network PC Card does not work properlyFrequently Asked Questions What is ISM band? What is Spread Spectrum?What is DSSS? What is FHSS? And what are their differences? Can Instant WirelessTM products support printer sharing?Warranty Information Specifications for the PCI AdapterAppendix Environmental Information for the PCI AdapterContact Information Copyright 2001 Linksys, All Rights Reserved

WDT11 specifications

The Linksys WDT11 is a wireless bridge designed to extend connectivity and provide enhanced network performance in both home and office environments. As part of Linksys' renowned product line, the WDT11 stands out due to its unique features that cater to various networking needs.

One of the primary characteristics of the WDT11 is its ability to bridge wired and wireless networks seamlessly. This capability allows users to connect their existing wired devices, such as printers or desktop computers, to a wireless network without the need for extensive cabling. The device supports 802.11b wireless standards, ensuring a reliable connection with speeds up to 11 Mbps, which was impressive at the time of its release.

The WDT11 features a user-friendly interface that simplifies the setup process. With a straightforward configuration page, users can easily manage and customize their network settings. Additionally, the firmware can be updated to ensure the bridge maintains optimal performance and security over time.

Security is another crucial aspect of the WDT11. It supports Wired Equivalent Privacy (WEP) encryption, which helps to safeguard the network from unauthorized access. While WEP encryption is now considered outdated, the device’s support for WEP at the time provided a necessary level of security for wireless communications.

For optimal connectivity, the Linksys WDT11 is equipped with multiple antennae positioned for improved signal strength and range. This ensures that even devices located far from the wireless router can maintain a stable connection. The range of the WDT11 is suitable for medium-sized homes and small offices, making it a versatile option for various environments.

The device also incorporates Linksys’ Multi-Purpose Architecture (MPA), contributing to its flexibility and usability. This feature allows the WDT11 to function not only as a wireless bridge but also in different modes such as access point and client mode, accommodating various networking scenarios.

In summary, the Linksys WDT11 is a robust wireless bridge that enhances connectivity for both wired and wireless devices. With its ease of use, basic security features, and adaptable functionality, it represents a solid choice for users looking to expand their network capabilities. As technology continues to advance, the WDT11 remains a testament to Linksys' commitment to quality and innovative networking solutions.