Instant EtherFast® Series
5.Highlight Linksys Compact USB 2.0 10/100 Network Adapter, and
6.Select Uninstall.
7.When you see the Confirm Device Removal screen, click OK.
8.Go to “Chapter 7: Windows 2000 Installation” for installation instructions.
•For Windows XP, do the following:
1.Click Start, and
2.Select Properties.
3.Click the Hardware tab.
4.Click the Device Manager button.
5.Click the + sign next to Network adapters.
6.Highlight Linksys Compact USB 2.0 10/100 Network Adapter, and
7.Select Uninstall.
8.When you see the Confirm Device Removal screen, click OK.
9.Go to “Chapter 8: Windows XP Installation” for installation instructions.
Compact USB 2.0 10/100 Network Adapter
Appendix B: Client for Microsoft Setup for Windows 98
If you are installing the Compact USB 2.0 10/100 Network Adapter in a Windows 98 PC that is used in an NT domain, follow these directions:
1.Start up Windows. Click Start, and select Settings. Open the Control Panel.
2.
3.In the Primary Network Logon box, choose Client for Microsoft Networks, which instructs your PC to log into an NT domain or Windows 2000 server where you already have a username and password set up.
4.Highlight Client for Microsoft Networks, and click the Properties button.
5.The Client for Microsoft Network Properties screen will appear. Make sure that Log on to Windows NT domain is checked in the Logon Validation box. Enter the name of your domain in the Windows NT Domain field.
6.From the Access Control tab, you can set the level of access that network users will have to this computer.
7.When you are done, click the OK button. When asked if you want to restart your PC, click the Yes button.
34 | 35 |