Chapter 3
Advanced Configuration
To connect to a wireless network, proceed to How to Connect to a Wireless Network, page 4. To disconnect from a wireless network, select the network from the list, and then click Disconnect. To refresh the list of available wireless networks, click Search Again.
How to Connect to a Wireless Network
Follow these instructions to connect to a wireless network that has not been saved. (To connect to a saved network, go to How to Connect to a Saved Network, page 8.)
1.In the Connect to a Wireless Network screen, locate the name of your wireless network in the list. If your wireless network is not in the list, proceed to How to Connect to a Hidden Wireless Network, page 5.
2.If your wireless network supports 
icon appears next to the network’s name), go to How to Connect Using
3.Select your network, and then click Connect.
Select a Wireless Network
4.If the wireless network uses wireless security, enter the security key, and then click Next to continue.
Enter Wireless Network’s Security Key
RangePlus Wireless USB Network Adapter
5.The Checking Connection screen appears while the Wireless Manager establishes the wireless connection. When it is finished, click Next to continue.
Checking Connection
6.The Connected to Your Network screen appears. If you want the Wireless Manager to remember your network’s settings (so that it will be easier to reconnect to should it become disconnected), click Remember this network. Click Finish to exit the Wireless Manager.
Connected to Your Network
Congratulations! The Adapter is connected to
the network.
4