Wireless-G Business USB Network Adapter with RangeBooster
4.If you chose Infrastructure Mode, go to Step 5 now. If you chose
Select the correct operating channel for your wireless network. The channel you choose should match the channel set on the other devices in your wireless network. If you are unsure about which channel to use, keep the default setting.
Click the Next button. Click the Back button to change any settings.
5.If your wireless network doesn’t have wireless security, select Disabled and then click the Next button to continue. Proceed to Step 6.
If your wireless network has wireless security, select the method of security used: WEP, WPA/WPA2 Personal, WPA/WPA2 Enterprise, RADIUS or LEAP. WEP stands for Wired Equivalent Privacy, and WPA stands for
Proceed to the appropriate section for your security method: WEP,
WEP
WEP - Select
Passphrase - Enter a passphrase in the Passphrase field, so a WEP key is automatically generated. It is case- sensitive and should not be longer than 16 alphanumeric characters. This passphrase must match the passphrase of your other wireless network devices and is compatible with Linksys wireless products only. (If you have any
WEP Key - The WEP key you enter must match the WEP key of your wireless network. For
Advanced Users
TX Key - The default transmit key number is 1. If your network’s access point or wireless router uses transmit key number 2, 3, or 4, select the appropriate number from the TX Key
Chapter 5: Using the Wireless Network Monitor
wep (wired equivalent privacy): a method of encrypting network data transmitted on a wireless network for greater security.
wpa
wpa2 offers a stronger encryption than wpa by using the AES (Advanced Encryption Standard) which is a block cipher with block sizes of 128, 192 or 256 bits.
Figure 5-14: Creating a Profile - Manual Setup -
Wireless Security - Disabled
Figure 5-15: Creating a Profile - Manual Setup -
Wireless Security - WEP
26
Create a New Profile