Linksys WMP11 manual Instant Wireless Series

Page 17

Instant Wireless® Series

5.The Network Setting screen (Figure 7-12) will appear.

If your network has a DHCP server, click the radio button next to Obtain an IP address automatically (DHCP). Click the Next button to continue, or click the Back button to return to the previous screen.

If your network does not have a DHCP server, click the radio button next to Specify the IP address. Enter an IP Address, Subnet Mask, Default Gateway, and DNS appropriate for your network. Enter each address in this format: xxx.xxx.xxx.xxx (the x’s represent the numbers that make up each address). You must specify the IP Address and Subnet Mask on this screen. If you are unsure about the Default Gateway and DNS addresses, then leave these fields alone.

IP Address - This IP Address must be unique to your network.

Subnet Mask - The Adapter’s Subnet Mask must be the same as your wired network’s Subnet Mask.

Default Gateway - Enter the IP address of your network’s Gateway here. DNS - Enter the DNS addresses of your Ethernet (wired) network here.

Click the Next button to continue or the Back button to return to the previ- ous screen.

Figure 7-12

Wireless-B PCI Adapter

6.The Security Settings screen (Figure 7-13) will appear. Enable or disable Wired Equivalent Privacy (WEP) encryption for your wireless network. If you enable WEP, enter a Passphrase or WEP key. Click the Next button to continue or the Back button to return to the previous screen.

WEP (Disabled/64-bit WEP/128-bit WEP) - If you do not want to use WEP encryption, choose Disabled. To use WEP encryption (recommended to increase network security), select 64-bit or 128-bit WEP from the drop- down menu, and enter either a Passphrase or WEP key.

Passphrase - Instead of manually entering WEP keys, you can enter a Passphrase, so that a WEP key is automatically generated. It is case-sensi- tive and should not be longer than 16 alphanumeric characters. This passphrase must match the passphrase of your wireless network and is com- patible with other Linksys wireless products only. (If you have any non- Linksys wireless products, enter the WEP key(s) manually on those prod- ucts.)

Key 1 - This WEP key must match the WEP key of your wireless network. If you are using 64-bit WEP encryption, then the key must consist of exact- ly 10 hexadecimal characters. If you are using 128-bit WEP encryption, then the key must consist of exactly 26 hexadecimal characters. Valid hexa- decimal characters are “0” to “9” and “A” to “F”.

Figure 7-13

26

27

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Wireless-B PCI Adapter WMP11-v4-UG-30530A KL Table of Contents Introduction Wireless-B PCI AdapterFeatures Network Topology Planning Your Wireless NetworkAd-Hoc versus Infrastructure Mode Wireless-B PCI Adapter’s Port and LEDs Getting to Know the Wireless-B PCI AdapterHardware Installation for Windows XP OverviewDriver Installation for Windows XP Windows XP Wireless Zero Configuration Instant Wireless Series Instant Wireless Series Proceed to Hardware Installation for Windows 98SE, Me Hardware Detection for Windows 98SE, Me, Hardware Installation for Windows 98SE, Me,Link Information Starting the Wlan MonitorSite Information Site SurveyProfile Information ProfilesCreating a New Profile Instant Wireless Series Frequently Asked Questions Appendix a TroubleshootingCommon Problems and Solutions What Ieee 802.11b features are supported? Appendix B Glossary Can Instant Wireless products support printer sharing?Instant Wireless Series Instant Wireless Series Environmental Appendix C SpecificationsAppendix E Contact Information Appendix D Warranty InformationCopyright 2003 Linksys, All Rights Reserved

WMP11 specifications

The Linksys WMP11 is a wireless network adapter that exemplifies the early 802.11b technology, designed to enhance connectivity in home and small office environments. Launched in the early 2000s, this product was one of the first to facilitate wireless connections for desktop PCs, allowing users to harness the power of wireless networking without the constraints of physical cables.

One of the main features of the WMP11 is its compatibility with the 802.11b wireless standard, which offers data transfer rates of up to 11 Mbps. This was a crucial advancement in networking technology at the time, as it enabled users to enjoy a significantly faster internet connection compared to traditional dial-up services. The adapter operates on the 2.4 GHz frequency band, providing a range of approximately 150 feet indoors and up to 300 feet outdoors under optimal conditions.

The WMP11 comes equipped with a PCI interface, making installation straightforward for users with compatible desktop computers. The adapter features Linksys' Plug and Play technology, allowing for easy setup and configuration. With a driver disk provided, users can quickly install the necessary software to get the device up and running. Moreover, it supports WEP security protocols, which, while dated compared to modern standards, offered basic encryption to protect wireless connections during its time.

Additionally, the WMP11 integrates seamlessly with other Linksys networking products, particularly their wireless routers, enabling users to create a robust and comprehensive wireless network. The adapter features a removable antenna, allowing users to replace it with a higher-gain antenna for extended range and improved signal quality.

Despite its age, the Linksys WMP11 laid the groundwork for subsequent generations of wireless technology. It helped usher in a new era of networking, characterized by the convenience and flexibility of wireless connectivity. While it may no longer meet the needs of today’s high-speed internet requirements, the WMP11 holds a nostalgic place in the evolution of wireless networking technology. Users seeking reliable wireless communication during its prime found a dependable solution in the WMP11, making it a noteworthy device in the history of networking.
Top Page Image Contents