Linksys PCMLM56 manual Windows 98 Network Configuration, Tcp/Ip

Instant EtherFast® Series

Windows 98 Network Configuration

1.From the Windows 98 desktop, click the Start button, select Settings, open the Control Panel and double-click the Network icon.

2.The Network window will appear. Click the Configuration tab. A window similar to the one below will appear. There may be other components list- ed in addition to the ones shown below (for example, a Dial-up Adapter), which is normal. You will need to manually install one of the protocols list- ed below. It is recommended that you install TCP/IP and provide an IP address to use the Internet services.

•Client for Microsoft Networks

•Linksys EtherFast 10/100 Compact USB Network Adapter

•TCP/IP

For instructions on manually installing these components, refer to Manually Installing Network Components now. Please note that Linksys does not provide technical support or troubleshooting for TCP/IP.

EtherFast® 10/100 Compact USB Network Adapter

3.Click the File and Print Sharing button. The File and Print Sharing win- dow will appear.

4.If you'd like others to be able to access the files on your PC's hard drive, select I want to be able to give others access to my files.

If you'd like to share your printer with other users	Note: If you do not enable
on the network, select I want to be able to allow	File and Print Sharing,
others to print to my printer.	your PC will be invisible
	on the network and inac-
	cessible to other users.

5.Click the OK button. File and Printer Sharing for

Microsoft Networks should now appear in the list of installed components.

11 12