Accessories

Accessories	J1990A	LAN Analyzer Tap	Qty__
	For use with the J6805A Distributed Network Analyzer ME.
	This accessory provides the means to monitor an in-service 10/100 Mb/s Ethernet
	connection unintrusively.
	J2928A	Pair of 10 dB Optical Attenuators (SC connectors)	Qty__
	For use with the J6811A LIM. Note: a pair is included with each J6811A LIM.
	This accessory provides replacement attenuators should the originals be lost.
	J2929A	Multi-mode Optical splitter	Qty__
		(SC connectors) for use with J6811A LIM
	J5491A	Pair of SX GBIC Modules	Qty__
	For use with the J6832A LIM. Note: a pair is included with each J6832A LIM. This
	accessory provides replacements should the originals be lost.
	J5492A	Pair of LX GBIC Modules	Qty__
	For use with the J6832A LIM.
	J5493A	SX Optical Splitter (50/50 split ratio)	Qty__
	For use with the J6832A LIM.
	J5494A	LX Optical Splitter (50/50 split ratio)	Qty__
	For use with the J6832A LIM.
	J5495A	Copper GBIC Module (one only)	Qty__
	For use with the J6832A LIM.
	J6750A	Alternative Hard Disk Drive Assembly	Qty__
	For use with the J6800A Network Analyzer.
	This accessory comes pre-loaded with the operating system and the current version of Network
	Analyzer Software. The drive can be swapped with the J6800A HDD for security reasons.
	The use model for this accessory is as follows: the analyzer is moved between high-security
	locations leaving a J6750A HDD secured at each of these locations. In this way, no
	security risk occurs when the analyzer is moved as all sensitive data stays with the HDD.
	J6751A	Alternative Hard Disk Drive Assembly	Qty__
	For use with the J6802A Distributed Network Analyzer MX.

This accessory comes pre-loaded with the operating system and the current version of Network Analyzer Software. The drive can be swapped with the J6802A HDD for security reasons.

The use model for this accessory is similar to that for the J6750A accessory. Note that the J6750A and the J6751A differ not only in the software loaded on each but also physically; they are not interchangeable.

J6753A	Additional Combo 56K Modem	Qty__
	10/100BaseTX Network Interface Card

This accessory can be used as a measurement interface for use with Network Analyzer

Software.

One instance of this network interface card is included with the J6800A Network

Analyzer when it ships. This accessory should therefore only be ordered if the customer

connection unintrusively.

J2928A

For use with the J6800A Network Analyzer.

For use with the J6802A Distributed Network Analyzer MX.

10/100BaseTX Network Interface Card