802.1x Configuration

	devices in order to establish a connection.
	KEY1 ~ KEY 4：You can specify up to 4 different
	keys, but only one can be used at a time.
	Encryption：Enter the key value in this field.
	A key of 10 hexadecimal characters (0-9, A-F) is
	required if a 40-bit (a.k.a. 64-bit) Key Size is
	selected.
	A key of 26 hexadecimal characters (0-9, A-F) is
	required if a 128-bit Key Size is selected.
	A key of 58 hexadecimal characters (0-9, A-F) is
	required if a 256-bit Key Size is selected.
Key size	Select from 40-bit (a.k.a. 64-bit),128-bit or
	256-bit.

The 802.1x Configuration window is used to configure WEP, CCX and WPA security with 802.1x authentication.

Protocol	This panel enables you to select an authentication
	protocol.

Password	This panel is available when EAP-TLS is not selected
	(either MSCHAP V2 over PEAP is selected with WEP
	or LEAP is selected for CCX). This panel enables you
	to enter a login name and password or request that the
	driver prompt for them when you connect to a
	- 21 -

required if a 40-bit (a.k.a. 64-bit) Key Size is