Management, User’s Ports, WAN Ports | Allied Telesis AT-IMG646BD

AT-iMG646BD-ON Outdoor Ethernet intelligent Multiservice Gateway

Management

Easy to Deploy and Manage

Fiber-To-The-Home (FTTH) with the AT-iMG646BD-ON has never been easier. The AT-EN646 Outside Plant Enclosure may be pre-installed, and accommodates fiber termination and grounding for the iMG. When services are ordered, the iMG646BD-ON electronics chassis mounts easily into the enclosure, and will terminate in-home wiring and power connection.

Zero Touch Configuration with the ZTC

The AT-iMG646BD-ON is designed to be easy to deploy and manage. With the Zero Touch Configurator (ZTC) software platform, the AT-iMG646BD can be provisioned and managed remotely.The Zero Touch Configurator is a distributed configuration system based on the industry’s standard Lightweight Directory Access Protocol (LDAP) database architecture.This provides secure authentication and registration plus intelligent, automatic configuration of remote iMG units. Its XML-based structure enables seamless integration with service providers’ existing OSS platforms.

Specifications

User’s Ports

6 x 10/100TX (RJ45)

4 x VoIP FXS ports (RJ-11)

WAN Ports

100BX Single-Fiber (BX, SC/UPC) TX 1310 nm, RX 1550 nm

Range	15	Km
Power Budget	17	dB

Layer 2 Operation Layer 2 wirespeed packet switching IGMP v1/v2 Multicast Support Tag-based IEEE 802.1Q VLANs (16 max.) IEEE 802.1p prioritization

IEEE 802.1Q tag insertion and stripping

Programmable Rate limiting ingress/egress (32,000 steps) Port Mirroring ingress/egress traffic

Double QoS queue on each port

Port speed selection 10, 100 or 10/100 1,000 MAC addresses

Layer 3 Operation

NAT PPPoE

Stateful Inspection Firewall

Intrusion Detection and Blocking System IPSec/VPN passthrough

Virtual Server

Global IP address pool Dynamic port opening DHCP client, server and relay DNS proxy

PAP/CHAP authentication

Static and Dynamic IP address assignment RIPv1/v2

VoIP Protocols

H.323	3.0
SIP	2.0
MGCP/NCS	1.0

VoIP Ports

G.711 a-law and µ-law 64kbps

G.723 (optional)

G.726 16/24/32/40kbps

G.729 8kbps

G.168 LEC 8-32m/sec

T.38 Fax Relay

Automatic Fax/Modem Detection Voice Activity Detection (VAD) Comfort Noise Generation (CNG)

Error Mitigation/Bad Frame Interpolation Adaptive jitter buffer

REN: 5 per FXS port

RTP voice packet encapsulation

Class 5 Services

Call transfer

Call waiting

Call hold

Message waiting

Caller ID

Network Management Zero Touch Configurator

Local console port Telnet

Remote software upgrade

DHCP

Web GUI (optional)

LED Status Indicators

Power
System
POTS	Use/Ready/Ringing
WAN	Link/Activity
LAN	Link/Activity

Technical Specifications

Power Characteristics

External power supply
Input		12vDC, 1.5A
Power Consumption		10W	(typical)
		18W (maximum)
Environmental Specifications
Operating Temperature		-40ºC	to	+60ºC
Storage Temperature		-40ºC	to	+80ºC
Operating Humidity		5% to 95% RH
Physical Characteristics
AT-EN646 Enclosure
Dimensions		16.7 x 11.7 x 4.7 in.
		(H x W x D)
Weight		3.6 lbs
AT-iMG646BD-ON		12 x 8.7 x 1.2 in.
Dimensions		12 x 8.7 x 1.2 in.
		(H x W x D)
Weight		2.65	lbs
Protocols and Standards
IPv4	RFC 791
TCP, UDP	RFC 1144
IGMP (v1/v2)	RFC	1112, 2236
PPPoE	RFC 2516
PAP	RFC 1334
CHAP	RFC 1994
NAT	RFC 1631
DHCP	RFC 2131
VLAN	IEEE	802.1p/Q, IEEE 802.1d,
	IEEE	802.2, IEEE 802.3x
SNMP	v1,v2,v3
RTP/RTCP
TFTP	RFC 1350
Telnet	RFC	318
ARP	RFC 826
H.323	4.0
SIP 2.0	RFC	3261
MGCP/NCS	1.0
Codecs	G.711, G.726, G.729
Approvals
CE Marking
Saftey	EN60950-1 (TUV), EN60825-1,
	UL 60950-1 (cULus), CSA C22.2
	No. 60950-1
Emission	FCC Part 15 Class B
	EN 55022 Class			B
Immunity	EN 55024

Softswitch Interoperability

Cirpack, Net Centrex, Sonus Networks, Marconi, Siemens, Alcatel, Audiocodes, Mediatrix, Arelnet, HotSIP, Iptel, Italtel, Lucent, Netmeeting, Nuera, OKI, Open H.323

Warranty

Two years

Allied Telesis