CiS, ONnSCi, ONnVCi, OFFnSCi, OFFnVCi, …S Save

MULTI-TASKER

Command Format: [VERCnUi]

Cn = card ID (n = slot # from 1 to 19)

(1-8 for MT100-101 or 1-4 for MT100-106)

Ui = Unit ID (i = # from 0 to 9) (refer to the MT100-100 user’s guide for explanation)

Example:

If one MT103-120card is in slot #2 of unit 3:

When sending command [VERC2U3], the Multi- Tasker™ Enclosure will return feedback as

MT103-120 690-0125-010

MT103-120 = card type

690-0125-010 = software version

2.[C]

This command receives the status of the card. Command Format: [CnUi]

Cn = card ID (n = a slot # from 1 to 19) (1-8 for MT100-101 or 1-4 for MT100-106)

Ui = unit id (i = 0 to 9) (refer to the MT100-100 user’s guide for explanation)

Example:

If one MT103-120card is in slot #2 of unit 3 with S-Video outputs 1 and 2 ON and Video Output 3 ON:

When sending the command [C2U3], the Multi- Tasker™ Enclosure will return feedback as

SVID: 1,2 CVID: 3 C02

SVID: 1,2 = S-Video Outputs 1, 2 are enabled

CVID: 3 = Video Output 3 is enabled C02 = card is in slot 2

If there is no card in slot #2 of unit 3, sending the [C2U3] command will not return any feedback.

3.[CiS]

This command saves the current status of the card's output enable configuration. This configuration will be restored after system is reset or powered off then on.

Ci = card number

S = save configuration

If S-Video Outputs 1,2,3 and Video Outputs 1,2,3 are enabled, the feedback after sending the command [C4S], for slot 4, would be:

SVID: 1,2,3 CVID: 1,2,3 C04 Saved

4.[ONnSCi]

This command enables one or more of the S-Video outputs to be turned ON.

Sending the command [ON12SC2] will enable S-Video outputs 1 and 2 on card 2.

See command 8 [ON] for further details.

5.[ONnVCi]

This command enables one or more of the Video outputs to be turned ON.

Sending the command [ON12VC2] will enable Video outputs 1 and 2 on card 2.

See command 8 [ON] for further details.

6.[OFFnSCi]

This command disables one or more of the S-Video outputs.

Sending the command [OFF12SC2] will disable, turn OFF, S-Video outputs 1 and 2 on card 2.

See command 9 [OFF] for further details.

7.[OFFnVCi]

This command disables one or more of the Video outputs

Sending the command [OFF12VC2] will disable, turn OFF, Video outputs 1 and 2 on card 2.

See command 9 [OFF] for further details.

8.[…S] – Save

This command will save the configuration command being sent in memory. When sending the command [ON1VC4S], after reset or power up, Video output 1 on C4 will be enabled.